1.800.387.7115

1.877.432.3627

  • DMR_Applicators_300x300

    Applicators are designed to install standard radial retaining rings on a shaft. Used with Dispensers, applicators enable operators to install rings quickly and correctly (ring “snaps” when properly seated in groove.)
    For use with Retaining Rings E/SE/YE
    *45 ° deg, 90 ° deg and Offset applicators for C,E,RE Retaining Rings- Replace the Last "0" of the Applicator designation with a "4"(45 °), "9" (90°) or "7" (Offset)
    (Eg , A-304, A309, A-307 etc.)
    ** Please Wear Protective eyeware while intsalling and removing retaining ring & hose clamps.**

  • DMR_Applicators_300x300

    Applicators are designed to install standard radial retaining rings on a shaft. Used with Dispensers, applicators enable operators to install rings quickly and correctly (ring “snaps” when properly seated in groove.)
    For use with Retaining Rings RE Rings 
    *45 ° deg, 90 ° deg and Offset applicators for C,E,RE Retaining Rings- Replace the Last "0" of the Applicator designation with a "4"(45 °), "9" (90°) or "7" (Offset)
    (Eg , A-304, A309, A-307 etc.)
    ** Please Wear Protective eyeware while intsalling and removing retaining ring & hose clamps.**

  • DMR_Applicators_300x300

    Applicators are designed to install standard radial retaining rings on a shaft. Used with Dispensers, applicators enable operators to install rings quickly and correctly (ring “snaps” when properly seated in groove.)
    For use with Retaining Rings C Rings 
    *45 ° deg, 90 ° deg and Offset applicators for C,E,RE Retaining Rings- Replace the Last "0" of the Applicator designation with a "4"(45 °), "9" (90°) or "7" (Offset)
    (Eg , A-304, A309, A-307 etc.)
    ** Please Wear Protective eyeware while intsalling and removing retaining ring & hose clamps.**

  • DMR_Applicators_300x300

    Applicators are designed to install standard radial retaining rings on a shaft. Used with Dispensers, applicators enable operators to install rings quickly and correctly (ring “snaps” when properly seated in groove.)
    For use with Retaining Rings PO/POL Rings 
    *45 ° deg, 90 ° deg and Offset applicators for C,E,RE Retaining Rings- Replace the Last "0" of the Applicator designation with a "4"(45 °), "9" (90°) or "7" (Offset)
    (Eg , A-304, A309, A-307 etc.)
    ** Please Wear Protective eyeware while intsalling and removing retaining ring & hose clamps.**

  • DMR_Applicators_300x300

    Applicators are designed to install standard radial retaining rings on a shaft. Used with Dispensers, applicators enable operators to install rings quickly and correctly (ring “snaps” when properly seated in groove.)
    For use with Retaining Rings JE Rings 
    *45 ° deg, 90 ° deg and Offset applicators for C,E,RE Retaining Rings- Replace the Last "0" of the Applicator designation with a "4"(45 °), "9" (90°) or "7" (Offset)
    (Eg , A-304, A309, A-307 etc.)
    ** Please Wear Protective eyeware while intsalling and removing retaining ring & hose clamps.**

  • DMR_Applicators_300x300

    Applicators are designed to install standard radial retaining rings on a shaft. Used with Dispensers, applicators enable operators to install rings quickly and correctly (ring “snaps” when properly seated in groove.)
    For use with Retaining Rings DE Rings 
    *45 ° deg, 90 ° deg and Offset applicators for C,E,RE Retaining Rings- Replace the Last "0" of the Applicator designation with a "4"(45 °), "9" (90°) or "7" (Offset)
    (Eg , A-304, A309, A-307 etc.)
    ** Please Wear Protective eyeware while intsalling and removing retaining ring & hose clamps.**

  • DMR_Applicators_300x300

    Applicators are designed to install standard radial retaining rings on a shaft. Used with Dispensers, applicators enable operators to install rings quickly and correctly (ring “snaps” when properly seated in groove.)
    For use with Retaining Rings ME Rings 
    *45 ° deg, 90 ° deg and Offset applicators for C,E,RE Retaining Rings- Replace the Last "0" of the Applicator designation with a "4"(45 °), "9" (90°) or "7" (Offset)
    (Eg , A-304, A309, A-307 etc.)
    ** Please Wear Protective eyeware while intsalling and removing retaining ring & hose clamps.**

  • DMR_Applicators_300x300

    Applicators are designed to install standard radial retaining rings on a shaft. Used with Dispensers, applicators enable operators to install rings quickly and correctly (ring “snaps” when properly seated in groove.)
    For use with Retaining Rings BE/BSE Rings 
    *45 ° deg, 90 ° deg and Offset applicators for C,E,RE Retaining Rings- Replace the Last "0" of the Applicator designation with a "4"(45 °), "9" (90°) or "7" (Offset)
    (Eg , A-304, A309, A-307 etc.)
    ** Please Wear Protective eyeware while intsalling and removing retaining ring & hose clamps.**

  • DMR_Applicators_300x300

    Applicators are designed to install standard radial retaining rings on a shaft. Used with Dispensers, applicators enable operators to install rings quickly and correctly (ring “snaps” when properly seated in groove.)
    For use with Retaining Rings DC Rings 
    *45 ° deg, 90 ° deg and Offset applicators for C,E,RE Retaining Rings- Replace the Last "0" of the Applicator designation with a "4"(45 °), "9" (90°) or "7" (Offset)
    (Eg , A-304, A309, A-307 etc.)
    ** Please Wear Protective eyeware while intsalling and removing retaining ring & hose clamps.**

Daemar at a Glance

Managing the sourcing & delivery of millions of Essential Components to the manufacturing & MRO marketplace.

Four locations across North America:

Daemar Canada

Daemar USA

ISO-9001 Registered QMS

Copyright 2016, Daemar Inc. | Design by Persona Corp.