(196) Once installed in the groove of a housing/bore. the portion of the ring protruding from the groove (also called a "shoulder") holds an assembly in place.
Size Range: 8 mm - 400 mm
The radius "R" on the load side must not exceed 0.1 T.
(42) Functions like an HO ring in a housing/bore. only the lugs are "reversed." This version reduces the distance the lugs of the standard DHO extend into the inner circumference of the housing/bore and allows for another assembly to pass through unimpeded.
Size Range: 12 mm - 100 mm
The radius "R" on the load side must not exceed 0.1 T.
(54) Similar in design to the DHO internal ring. this features several “teeth” equally distributed along the circumference of the ring. The increased shoulder offered by the teeth is particularly effective in retaining applications with large radii or chamfers.
Size Range: 16 mm - 170 mm
The radius "R" on the load side must not exceed 0.1 T.
(33) A thicker version of the DHO featuring a larger radial width than this ring. Once
installed in the groove of a housing/bore. the portion of the ring protruding from the groove (also called a “shoulder”) holds an assembly in place.
Size Range: 20 mm - 100 mm
The radius "R" on the load side must not exceed 0.1 T.
(38) The DSR is an extra thick version of a regular DSH retaining ring. As such. it is stronger and can withstand greater thrust loads than its standard counterpart.
Size Range: 12 mm - 100 mm
The radius "R" on the load side must not exceed 0.1 T.
(194) Once installed in the groove of a shaft. the portion of the ring protruding from the groove (also called a "shoulder") holds an assembly in place.
Size Range: 3 mm - 400 mm
The radius "R" on the load side must not exceed 0.1 T.
(40) Functions like an SH ring on a shaft. only the lugs are "reversed." This version reduces the distance the lugs of the standard DSH extend beyond the circumference of the shaft. The shaft can then be used in an application where clearance in minimal.
Size Range: 12 mm - 100 mm
The radius "R" on the load side must not exceed 0.1 T.
(43) Similar in design to the DSH external ring. this features several “teeth” equally distributed along the circumference of the ring. The increased shoulder offered by the teeth is particularly effective in retaining applications with large radii or chamfers.
Size Range: 16 mm - 140 mm
The radius "R" on the load side must not exceed 0.1 T.
(83) Once installed in the groove of a housing/bore, the portion of the ring protruding from the groove (also called a "shoulder") holds an assembly in place.
(57) Once installed in the groove of a shaft, the portion of the ring protruding from the groove (also called a "shoulder") holds an assembly in place.
(22) The MSR is an extra thick vision of a regular MSH retaining ring. As such, it is stronger and can withstand greater trust loads than its standard counterpart.
This site includes links to other internet sites
solely as a convenience to users. Daemar, Inc. does not endorse any
such linked sites or the information, material, products and services
offered.
