1.800.387.7115

1.877.432.3627

  • DE - External E Ring

    Perhaps the most popular and widely used radial retaining ring is the "E" (so named because it is shaped like the letter "E".) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.

    Material Finish: Phosphate 

    Material Codes: Carbon Steel 

    Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)

    This standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS & ELV compliant.



    Size Range: 8 mm - 30 mm

    Sharp Corner Abutment.The radius "R" on the load side must not exceed 0.1 T.

  • DE - External E Ring

    Perhaps the most popular and widely used radial retaining ring is the "E" (so named because it is shaped like the letter "E".) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.

    Material Finish/Code: Stainless Steel 

    PH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900º F.



    Size Range: 8 mm - 30 mm

    Sharp Corner Abutment.The radius "R" on the load side must not exceed 0.1 T.

  • DE - External E Ring

    Perhaps the most popular and widely used radial retaining ring is the "E" (so named because it is shaped like the letter "E".) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.

    Material Finish: ZD Zinc Dichromate 

    Material Code: Carbon Steel 

    Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)

    This coating features a yellow dichromate post plating finish. It affords the metal excellent salt spray protection (96 hours) and is particularly effective for applications exposed to seawater. SAE 1060-1090 steel retaining rings are zinc plated using a mechanical plating process, which effectively eliminates hydrogen embrittlement.

    Size Range: 8 mm - 30 mm

    Sharp Corner Abutment.The radius "R" on the load side must not exceed 0.1 T.

  • DE - External E Ring

    Perhaps the most popular and widely used radial retaining ring is the "E" (so named because it is shaped like the letter "E".) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.

    Material Finish: Z3X Trivalent Chromate Zinc Plus Sealer

    Material Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)

    This standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. RoHS & ELV compliant.


    Size Range: 8 mm - 30 mm

    Sharp Corner Abutment.The radius "R" on the load side must not exceed 0.1 T.

  • DE - External E Ring

    Perhaps the most popular and widely used radial retaining ring is the "E" (so named because it is shaped like the letter "E".) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.

    Material Finish: Zinc Bright  

    Material Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)

    This standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting.

    Size Range:
    8 mm - 30 mm

    Sharp Corner Abutment.The radius "R" on the load side must not exceed 0.1 T.

Daemar at a Glance

Managing the sourcing & delivery of millions of Essential Components to the manufacturing & MRO marketplace.

Four locations across North America:

Daemar Canada

Daemar USA

ISO-9001 Registered QMS

Copyright 2016, Daemar Inc. | Design by Persona Corp.