(31) DMR Stainless Steel Shim can be used in any application where corrosion is a concern. DMR Stainless Steel
is 300 Series, full hard tempered (half-hard and annealed Stainless is also available on request). Full-hard
Stainless Steel is slightly magnetic due to cold rolling. Stainless Steel Shim Stock has a Rockwell hardness of
C40-45 and meets the following specifications: MIL-S-5059, QQS766 and QQS763. Special slit widths are also
available on request. Typical weight: .010” X 6” X 50” =. 875lbs.
(24) DMR Brass Shim Stock is used where some stiffness is required and where corrosion problems exist. It has
been cold rolled to a 1/2 hard temper with a tensile strength of appox. 62,000 PSI. Brass Shim Stock is 70%
Copper & 30% Zinc. It has a Rockwell hardness of 30T 56/68.
Brass Shim Stock meets the following specifications: SAE-CA 260,ASTM-B-36, AMS-4507 & QQB-613-#2. Typical
weight : .010” X 6” X 100” 1.8 lbs.
(32) DMR Steel Shim is low carbon mild steel cold rolled to a #1 hard temper. It is stiff and springy, and can be used
where hardness is required. The material can be punched or sheared with minimum burring and distortion.
Steel Shim Stock meets the following specifications: AISI 1010 & QQS 698. Available in .001” to .031” and in
standard packages 6” X 100” or 12” X 120”. Special slit widths are also available on request. Typical weight
.010” X 6” X 100” = 1.7lbs.
DMR Nickel Shim Stock is a 200 grade annealed
material. It meets the following specifications:
ASTM-B-160, B161, B162, B163 & B366. Nickel shim
is available in thickness from .001” to .010” and in
standard packages of 6” X 50”. Special slit widths are
also available on request. Typical weight: .010” X 6” X
50’ = .48 lbs
DMR Aluminum Shim Stock is a type 1100, which has
a minimum aluminum content of 99%. Its temper is
H-18, full hard. Aluminum shim stock has excellent
corrosion resistance and high thermal and electrical
conductivity. The material meets the following
specifications: QQA 250, MIL-W-85, ASTM-B-209.
Aluminum shim is available in thicknesses from
.001” to .010” and in standard packages of 6” x 100”.
Special slit widths are available on request. Typical
weight: .010” x 6” x 100” = .57 lbs.
DMR Blue Tempered Shim Stock is 1095 high carbon
spring steel. It has a Rockwell hardness of C 48/51.
Blue Tempered Spring Steel is polished and blued.
Blue Tempered Spring Steel shim is available in
thicknesses from .002” to .032”, 6” x 25” . Special slit
widths are available on request. Typical weight: .010”
x 6” x50” = .88 lbs.
DMR Annealed Steel is 1075 high-Carbon steel, which
is heat treatable. Annealed Steel is a spheriodized
annealed temper. DMR Annealed Shim Stock is the
only shim that can be formed in its annealed condition,
and then heat-treated to a hard (spring) temper.
Special slit widths upon request. Typical weight: .032”
x 6” x 50” = 2.5lbs.
DMR Copper Shim Stock is a 110 alloy material in
the annealed (soft) condition. Copper shim meets the
following specifications; CDA-110, MIL-C12168, QQC-
576. Copper shim is available in thicknesses from
.001” to .010” in standard packages 6” x 100” cans.
Special slit widths are available on request. Typical
weight: .010” x 6” x 100” = 1.94lbs.
This site includes links to other internet sites
solely as a convenience to users. Daemar, Inc. does not endorse any
such linked sites or the information, material, products and services
offered.
