Item # FW Series, FW Series - Fiber-Lube™ on Daemar Inc.

All Categories > Bushings & Bearings > Fiber-Lube™ > FW Series - Fiber-Lube™ > Item # FW Series

Download PDF

Printable Page Email

Email This Page

Save To Favorites


	Item # FW Series, FW Series - Fiber-Lube™

Download PDF

Email This Page

Save To Favorites


larger image	The DMR Fiber Wound Series bearing is a high load, low RPM bearing designed for rigorous industrial equipment applications. The bearing is manufactured by a filament winding process that results in a continuous fiberglass filament backing. This composition yields excellent mechanical properties especially fatigue resistance. The filament wound fiberglass structure uses a high strength, corrosion resistant epoxy resin as the matrix material. The high strength backing permits the use of a thin wall (1/16" to 1/8") bearing which can often reduce the size and weight of the finished bearing assembly. Our FW Series will support a bearing load of 30,000 PSI, while handling high radial and axial stresses. They resist high shock loading and impact fatigue due to their unique high strength continuous fiberglass backing. These qualities make the FW bearings ideal for high load operation in rotational and linear motion as well as in oscillation. This family of materials exhibits exceptional dimensional stability and performance predictability over wide temperature ranges (±325°F). Typical Applications FW bearings are used in highly loaded bearing joints where a life cycle of over 500,000 cycles is desired. Testing has shown this bearing has wear under 0.006" after 1.6 million cycles. Applications include material handling equipment, heavy-duty cranes, earth-moving equipment, construction equipment, agriculture equipment, 4 post automotive lifts, and food processing systems.

DOWNLOADS


		FW Technical Sheet (PDF, 245KB)

		Bearing Design Principles (PDF, 324KB)

		Lubrication Requirements (PDF, 77KB)

		Installation Guide Fiber Lube (PDF, 111KB)

		Interchange (PDF, 96KB)

		Application Data Sheet (PDF, 198KB)

Heavy Wall Sizes


	Fiber-Lube™ - Inch Sizes

Metric Sizes


	Fiber-Lube™ - Metric Sizes

Copyright © 1996-2007. All rights reserved.
Daemar® Inc. / DMR™ / Fiber-Lube™ / Quick-Turn™ are trademarks of
Daemar® Inc. All material on the site, including, without limitation,
text, logo, software, photos, video, graphics, music, and sound, are
protected by copyright laws, both as individual works and as a
collection. No reproduction authorized in any form electronic or
otherwise without specific written permission.

This site includes links to other internet sites solely as a convenience
to users. Daemar, Inc. does not endorse any such linked sites or the
information, material, products and services offered.