TH Flanged Bushings
Length = 4.00 to 26.00 mm
Shaft Diameter = 5.978 to 44.975 mm

The FTH flanged bushing consists of a carbon steel backing, an intermediate layer of sintered bronze, PTFE based sliding lining. From a technical point of view, the product is already widely known and new applications are constantly being identified to take advantage of the high load capacity, the self-lubricated feature and the excellent ratio between cost and performance of the whole range.
Unit of Measure

Diameter - D1

N/A 10 mm FTH_dim.jpg

Diameter - D3

N/A 18 mm

Length - L

N/A 7.0 mm

Shaft Diameter - d

N/A 9.972 mm9.987 mm

Housing Bore - Dg

N/A 12.000 mm12.018 mm

Installed ID - D1E

N/A 9.990 mm10.058 mm

Max. Load Static

N/A 250 N/mm²36.000 psi

Max. Load Very Slow Speeds

N/A 140 N/mm²20.000 psi

Max. Load Rotating/Oscillating

N/A 60 N/mm²8.400 psi

Max. PV Dry Running Short term Operation

N/A 3.6 N/mm² x m/s102.000 psi-fpm

Max. PV Dry Running Continuous Operation

N/A 1.8 N/mm² x m/s51.000 psi-fpm

Temperature Range

N/A -195 to +280 ºC-319 to +536 ºF

Max. Speed Dry Running

N/A 2 m/s400 fpm

Max. Speed Hydrodynamic Operation

N/A > 2 m/s> 400 fpm

Thermal Conductivity

N/A 42 W(m x K)-1302 BTU/(hr)(ft²)(ºF/in)

Coefficient of Thermal Expansion

N/A 11*10-6*K-1

Coefficient of Friction

N/A 0.03 to 0.20


N/A BB1007DU


N/A PAF 10127 P10

SKF Glycodur

N/A PBG 101207

Daemar at a Glance

Managing the sourcing & delivery of millions of Essential Components to the manufacturing & MRO marketplace.

Four locations across North America:

Daemar Canada

Daemar USA

ISO-9001 Registered QMS

Copyright 2016, Daemar Inc. | Design by Persona Corp.