1.800.387.7115

1.877.432.3627

Thrust Washers
Width = 0.0585 & 0.0895 in
Inside Diameter = 0.500 to 2.250 in
Outside Diameter = 0.875 to 3.250 in

The Dryslide trademark identifies a whole range of self-lubricated dry sliding bearings. A composite structure, TW-TH thrust washers consists of a carbon steel backing, an intermediate layer of sintered bronze, PTFE based sliding lining. From a technical point of view, the product is already widely known and new applications are constantly being identified to take advantage of the high load capacity, the self-lubricated feature and the excellent ratio between cost and performance of the whole range.
Unit of Measure

Diameter - D4

N/A 0.7500 in

Diameter - D5

N/A 1.250 in

Width - S

N/A 0.0585 in

Dowel Hole - J

N/A 1.0050 in

Diameter - A

N/A 0.0990 in

Max. Load Static

N/A 250 N/mm²36.000 psi

Max. Load Very Slow Speeds

N/A 140 N/mm²20.000 psi

Max. Load Rotating/Oscillating

N/A 60 N/mm²8.400 psi

Max. PV Dry Running Short term Operation

N/A 3.6 N/mm² x m/s102.000 psi-fpm

Max. PV Dry Running Continuous Operation

N/A 1.8 N/mm² x m/s51.000 psi-fpm

Temperature Range

N/A -195 to +280 ºC-319 to +536 ºF

Max. Speed Dry Running

N/A 2 m/s400 fpm

Max. Speed Hydrodynamic Operation

N/A > 2 m/s> 400 fpm

Thermal Conductivity

N/A 42 W(m x K)-1302 BTU/(hr)(ft²)(ºF/in)

Coefficient of Thermal Expansion

N/A 11*10-6*K-1

Coefficient of Friction

N/A 0.03 to 0.20

GGB

N/A G10DU

Permaglide

N/A DU10

SKF Glycodur

N/A PXG10

Daemar at a Glance

Managing the sourcing & delivery of millions of Essential Components to the manufacturing & MRO marketplace.

Four locations across North America:

Daemar Canada

Daemar USA

ISO-9001 Registered QMS

Copyright 2016, Daemar Inc. | Design by Persona Corp.