Dual Flanged Pull Plugs -

Dual Flanged Pull Plugs are designed to mask weld nuts and nuts; they will mask off the hole and the first and last thread of a threaded nut or hole.

How the product is used
The plug is applied by being pulled into the threaded hole of the nut or weld nut until both flanges rest against the faces of the weld nut. The plug is removed by pulling it through the hole.

Recommended for
Powder coating, E-coating, Plating, Anodizing, Spray painting Temperature Range
Maximum temperature 600 ºF (315 ºC) Design Features

  • Flanged - The two flanged areas mask off the first and last thread of a threaded nut or hole.
  • Handle - The handle area above the flanged diameter helps with insertion and removal
  • Sizes - This series offers sizes specifically designed for metric threaded holes
  • Visible - The handle area above the flanged diameter makes the plug easier to see on the component
  • Reusable - The plugs are reusable depending on the application
  • Color coded - The Plugs are color coded to ease identification and sorting
  • Identification - The Shercon name is on the plug
Storage conditions
Items should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received.
1 - 6 of 6 | Results Per Page | View | Unit of Measure

Daemar P/N

Thread Size






Packaging -Bag

DFPP-SH-M6 N/A M6 N/A .197 in5.00 mm N/A 0.307 in7.80 mm N/A 0.268 in6.81 mm N/A 1.299 in32.99 mm N/A DARK GREEN N/A 1000
DFPP-SH-M8 N/A M8 N/A 0.264 in6.71 mm N/A 0.374 in9.50 mm N/A 0.311 in7.90 mm N/A 1.339 in34.01 mm N/A Rusty Red N/A 1000
DFPP-SH-M10 N/A M10 N/A .335 in8.51 mm N/A 0.445 in11.30 mm N/A 0.354 in8.99 mm N/A 1.378 in35.00 mm N/A DARK GREEN N/A 500
DFPP-SH-M12 N/A M12 N/A .406 in10.31 mm N/A .512 in13.00 mm N/A 0.457 in11.61 mm N/A 1.772 in45.01 mm N/A Purple N/A 250
DFPP-SH-M16 N/A M16 N/A .531 in13.49 mm N/A 0.669 in16.99 mm N/A 0.551 in14.00 mm N/A 1.969 in50.01 mm N/A White N/A 250
DFPP-SH-M20 N/A M20 N/A .669 in16.99 mm N/A 0.827 in21.01 mm N/A 0.709 in18.01 mm N/A 2.283 in57.99 mm N/A DARK BLUE N/A 100
1 - 6 of 6 | Results Per Page | View | Unit of Measure

Daemar at a Glance

Managing the sourcing & delivery of millions of Essential Components to the manufacturing & MRO marketplace.

Four locations across North America:

Daemar Canada

Daemar USA

ISO-9001 Registered QMS

Copyright 2016, Daemar Inc. | Design by Persona Corp.