1.800.387.7115

1.877.432.3627

Mulit Turn - Inch

Used for low force applications with large deflections: More turns equals less force. Utilizes nearly half the space as helical compression springs while producing the same force.

Multi-Turn Plain End and Multi-Turn Flat Shim tops available.

PART NUMBERS SHOWN REFLECT MULTI-TURN WAVE SPRINGS WITH PLAIN ENDS.

THE LETTERS SHOWN AFTER THE PART NUMBERS REPRESENT THE NUMBER OF TURNS. WHEN ORDERING, PARTS SHOULD BE PRESENTED WITH THE PART NUMBER, FOLLOWED BY THE MATERIAL, AND THEN THE NUMBER OF TURNS (i.e. WSL-37ST A, WSM-50ST B, WSR-75ST C, ETC.)

FOR FLAT SHIM TOP WAVE SPRINGS, ADD AN 'F' TO THE END OF THE PART NUMBER (i.e. WSL-37ST AF, WSM-50ST BF, WSR-75ST CF, ETC.)

MATERIAL CODES: ST = CARBON STEEL. SQ = 17-7 PH/C STAINLESS STEEL. SPECIAL ALLOYS AVAILABLE UPON REQUEST.

1 - 25 of 343 | Results Per Page | View | Unit of Measure
 1 2 3 4 5 »  

Daemar P/N

Shaft Diameter Clearance- Ds

Free Height Ref. -FH

Number of Turns

Thickness - T

Spring Rate Ref. Lbs./in.

WSL-37 A N/A .250 in N/A .150 in N/A 3 in N/A .008 in N/A 45 in
WSL-37 B N/A .250 in N/A .200 in N/A 4 in N/A .008 in N/A 39 in
WSL-37 C N/A .250 in N/A .250 in N/A 5 in N/A .008 in N/A 28 in
WSL-37 D N/A .250 in N/A .300 in N/A 6 in N/A .008 in N/A 24 in
WSL-37 E N/A .250 in N/A .350 in N/A 7 in N/A .008 in N/A 20 in
WSL-37 F N/A .250 in N/A .400 in N/A 8 in N/A .008 in N/A 19 in
WSL-37 G N/A .250 in N/A .450 in N/A 9 in N/A .008 in N/A 16 in
WSL-37 H N/A .250 in N/A .500 in N/A 10 in N/A .008 in N/A 15 in
WSL-37 I N/A .250 in N/A .550 in N/A 11 in N/A .008 in N/A 13 in
WSM-37 A N/A .250 in N/A .150 in N/A 3 in N/A .011 in N/A 101 in
WSM-37 B N/A .250 in N/A .200 in N/A 4 in N/A .011 in N/A 86 in
WSM-37 C N/A .250 in N/A .250 in N/A 5 in N/A .011 in N/A 67 in
WSM-37 D N/A .250 in N/A .300 in N/A 6 in N/A .011 in N/A 58 in
WSM-37 E N/A .250 in N/A .350 in N/A 7 in N/A .011 in N/A 47 in
WSM-37 F N/A .250 in N/A .400 in N/A 8 in N/A .011 in N/A 44 in
WSM-37 G N/A .250 in N/A .450 in N/A 9 in N/A .011 in N/A 37 in
WSM-37 H N/A .250 in N/A .500 in N/A 10 in N/A .011 in N/A 35 in
WSM-37 I N/A .250 in N/A .550 in N/A 11 in N/A .011 in N/A 31 in
WSL-43 A N/A .281 in N/A .165 in N/A 3 in N/A .008 in N/A 39 in
WSL-43 B N/A .281 in N/A .220 in N/A 4 in N/A .008 in N/A 31 in
WSL-43 C N/A .281 in N/A .275 in N/A 5 in N/A .008 in N/A 24 in
WSL-43 D N/A .281 in N/A .330 in N/A 6 in N/A .008 in N/A 21 in
WSL-43 E N/A .281 in N/A .385 in N/A 7 in N/A .008 in N/A 18 in
WSL-43 F N/A .281 in N/A .440 in N/A 8 in N/A .008 in N/A 16 in
WSL-43 G N/A .281 in N/A .495 in N/A 9 in N/A .008 in N/A 14 in
1 - 25 of 343 | Results Per Page | View | Unit of Measure
 1 2 3 4 5 »  

Daemar at a Glance

Managing the sourcing & delivery of millions of Essential Components to the manufacturing & MRO marketplace.

Four locations across North America:

Daemar Canada

Daemar USA

ISO-9001 Registered QMS

Copyright 2016, Daemar Inc. | Design by Persona Corp.