1.800.387.7115

1.877.432.3627

Shims rings are typically used in order to support , adjust for better fit, or provide a level surface. Shims may also be used as spacers to fill gaps between parts subject to wear.
26 - 50 of 70 | Results Per Page | View | Unit of Measure
1 2 3 

Daemar P/N

Free Diameter - Df

Section - S

N/A 3.875 in N/A .233 in
N/A 4.000 in N/A .233 in
N/A 4.125 in N/A .233 in
N/A 4.250 in N/A .233 in
N/A 4.375 in N/A .233 in
N/A 4.500 in N/A .233 in
N/A 4.625 in N/A .233 in
N/A 4.750 in N/A .233 in
N/A 4.875 in N/A .233 in
N/A 5.000 in N/A .233 in
N/A 5.125 in N/A .233 in
N/A 5.250 in N/A .233 in
N/A 5.375 in N/A .233 in
N/A 5.500 in N/A .233 in
N/A 5.625 in N/A .233 in
N/A 5.750 in N/A .233 in
N/A 5.875 in N/A .233 in
N/A 6.000 in N/A .233 in
N/A 6.125 in N/A .233 in
N/A 6.250 in N/A .233 in
N/A 6.375 in N/A .233 in
N/A 6.500 in N/A .233 in
N/A 6.750 in N/A .233 in
N/A 7.000 in N/A .375 in
N/A 7.250 in N/A .375 in
26 - 50 of 70 | Results Per Page | View | Unit of Measure
1 2 3 

Daemar at a Glance

Managing the sourcing & delivery of millions of Essential Components to the manufacturing & MRO marketplace.

Four locations across North America:

Daemar Canada

Daemar USA

ISO-9001 Registered QMS

Copyright 2016, Daemar Inc. | Design by Persona Corp.