1.800.387.7115

1.877.432.3627

Shims rings are typically used in order to support , adjust for better fit, or provide a level surface. Shims may also be used as spacers to fill gaps between parts subject to wear.
51 - 70 of 70 | Results Per Page | View | Unit of Measure
1 2 3 

Daemar P/N

Free Diameter - Df

Section - S

KMS-750 N/A 7.500 in N/A .375 in
KMS-775 N/A 7.750 in N/A .375 in
KMS-800 N/A 8.000 in N/A .375 in
KMS-825 N/A 8.250 in N/A .375 in
KMS-850 N/A 8.500 in N/A .375 in
KMS-900 N/A 9.000 in N/A .375 in
KMS-950 N/A 9.500 in N/A .375 in
KMS-1000 N/A 10.000 in N/A .375 in
KMS-1050 N/A 10.500 in N/A .375 in
KMS-1100 N/A 11.000 in N/A .375 in
KMS-1150 N/A 11.500 in N/A .375 in
KMS-1200 N/A 12.000 in N/A .375 in
KMS-1250 N/A 12.500 in N/A .375 in
KMS-1300 N/A 13.000 in N/A .375 in
KMS-1350 N/A 13.500 in N/A .375 in
KMS-1400 N/A 14.000 in N/A .375 in
KMS-1450 N/A 14.500 in N/A .375 in
KMS-1500 N/A 15.000 in N/A .375 in
KMS-1550 N/A 15.500 in N/A .375 in
KMS-1600 N/A 16.000 in N/A .375 in
51 - 70 of 70 | Results Per Page | View | Unit of Measure
1 2 3 

Daemar at a Glance

Managing the sourcing & delivery of millions of Essential Components to the manufacturing & MRO marketplace.

Four locations across North America:

Daemar Canada

Daemar USA

ISO-9001 Registered QMS

Copyright 2016, Daemar Inc. | Design by Persona Corp.