1.800.387.7115

1.877.432.3627

DMR Sleeves are precision stainless steel wear sleeves designed to prolong the life of damaged shafts and yokes by providing a new sealing surface that is superior to most original finishes and materials. Over time sealing lips can groove shafts due to factors such as dirt, heat, excessive water, lack of lubrication and high shaft speeds. DMR Sleeves offer a cost effective alternative to resizing, metalizing or replacing severely damaged surfaces. DMR Sleeve's low profile design means that the same size seal can be utilized and multi-lip oil seals can be accommodated.
1 - 25 of 129 | Results Per Page | View | Unit of Measure
 1 2 3 4 5 »  

Daemar P/N

Minimum Shaft Diameter

Maximum Shaft Diameter

Width

Length

Instal Tool Depth

99058 N/A 0.622 in15.80 mm N/A 0.630 in16.00 mm N/A 0.315 in8.0 mm N/A 0.437 in11.1 mm N/A 2.032 in51.6 mm
99062 N/A 0.621 in15.77 mm N/A 0.627 in15.93 mm N/A 0.312 in7.9 mm N/A 0.406 in10.3 mm N/A 2.032 in51.6 mm
99076 N/A 0.746 in18.95 mm N/A 0.752 in19.10 mm N/A 0.312 in7.9 mm N/A 0.437 in11.1 mm N/A 2.032 in51.6 mm
99078 N/A 0.783 in19.89 mm N/A 0.789 in20.04 mm N/A 0.312 in7.9 mm N/A 0.437 in11.1 mm N/A 2.032 in51.6 mm
99087 N/A 0.871 in22.12 mm N/A 0.877 in22.28 mm N/A 0.312 in7.9 mm N/A 0.437 in11.1 mm N/A 2.032 in51.6 mm
99098 N/A 0.980 in24.89 mm N/A 0.986 in25.04 mm N/A 0.312 in7.9 mm N/A 0.437 in11.1 mm N/A 2.032 in51.6 mm
99100 N/A 0.995 in25.27 mm N/A 1.002 in25.45 mm N/A 0.312 in7.9 mm N/A 0.437 in11.1 mm N/A 2.032 in51.6 mm
99101 N/A 0.995 in25.27 mm N/A 1.002 in25.45 mm N/A 0.312 in7.9 mm N/A 0.437 in11.1 mm N/A 2.032 in51.6 mm
99112 N/A 1.123 in28.52 mm N/A 1.127 in28.63 mm N/A 0.312 in7.9 mm N/A 0.438 in11.1 mm N/A 0.688 in17.5 mm
99116 N/A 1.123 in28.52 mm N/A 1.127 in28.63 mm N/A 0.375 in9.5 mm N/A 1/2 in12.7 mm N/A 0.688 in17.5 mm
99125 N/A 1.245 in31.62 mm N/A 1.253 in31.83 mm N/A 0.312 in7.9 mm N/A 0.437 in11.1 mm N/A 0.875 in22.2 mm
99128 N/A 1.254 in31.85 mm N/A 1.263 in32.08 mm N/A 0.312 in7.9 mm N/A 0.437 in11.1 mm N/A 0.875 in22.2 mm
99138 N/A 1.368 in34.75 mm N/A 1.374 in34.90 mm N/A 0.500 in12.7 mm N/A 5/8 in15.9 mm N/A 1.000 in25.4 mm
99139 N/A 1.372 in34.85 mm N/A 1.378 in35.00 mm N/A 0.500 in12.7 mm N/A 0.063 in1.6 mm N/A 1.000 in25.4 mm
99143 N/A 1.432 in36.37 mm N/A 1.438 in36.53 mm N/A 0.563 in14.3 mm N/A 0.688 in17.5 mm N/A 1.016 in25.8 mm
99144 N/A 1.435 in36.45 mm N/A 1.441 in36.60 mm N/A 0.375 in9.5 mm N/A 1/2 in12.7 mm N/A 1.016 in25.8 mm
99149 N/A 1.496 in38.00 mm N/A 1.503 in38.18 mm N/A 0.562 in14.3 mm N/A 0.688 in17.5 mm N/A 1.016 in25.8 mm
99150 N/A 1.497 in38.02 mm N/A 1.503 in38.18 mm N/A 0.375 in9.5 mm N/A 1/2 in12.7 mm N/A 1.016 in25.8 mm
99152 N/A 1.519 in38.58 mm N/A 1.526 in38.76 mm N/A 0.438 in11.1 mm N/A 0.563 in14.3 mm N/A 1.016 in25.8 mm
99155 N/A 1.549 in39.34 mm N/A 1.555 in39.50 mm N/A 0.438 in11.1 mm N/A 0.563 in14.3 mm N/A 1.016 in25.8 mm
99156 N/A 1.559 in39.60 mm N/A 1.565 in39.75 mm N/A 0.563 in14.3 mm N/A 0.688 in17.5 mm N/A 1.016 in25.8 mm
99157 N/A 1.572 in39.93 mm N/A 1.578 in40.08 mm N/A 0.512 in13.0 mm N/A 0.630 in16.0 mm N/A 1.023 in26.0 mm
99162 N/A 1.622 in41.20 mm N/A 1.628 in41.35 mm N/A 0.562 in14.3 mm N/A 0.688 in17.5 mm N/A 0.812 in20.6 mm
99168 N/A 1.684 in42.77 mm N/A 1.690 in42.93 mm N/A 0.563 in14.3 mm N/A 0.688 in17.5 mm N/A 0.875 in22.2 mm
99169 N/A 1.647 in41.83 mm N/A 1.653 in41.99 mm N/A 0.563 in14.3 mm N/A 0.689 in17.5 mm N/A 0.827 in21.0 mm
1 - 25 of 129 | Results Per Page | View | Unit of Measure
 1 2 3 4 5 »  

Daemar at a Glance

Managing the sourcing & delivery of millions of Essential Components to the manufacturing & MRO marketplace.

Four locations across North America:

Daemar Canada

Daemar USA

ISO-9001 Registered QMS

Copyright 2016, Daemar Inc. | Design by Persona Corp.