1.800.387.7115

1.877.432.3627

DMR Sleeves are precision stainless steel wear sleeves designed to prolong the life of damaged shafts and yokes by providing a new sealing surface that is superior to most original finishes and materials. Over time sealing lips can groove shafts due to factors such as dirt, heat, excessive water, lack of lubrication and high shaft speeds. DMR Sleeves offer a cost effective alternative to resizing, metalizing or replacing severely damaged surfaces. DMR Sleeve's low profile design means that the same size seal can be utilized and multi-lip oil seals can be accommodated.
26 - 50 of 129 | Results Per Page | View | Unit of Measure
 1 2 3 4 5 »  

Daemar P/N

Minimum Shaft Diameter

Maximum Shaft Diameter

Width

Length

Instal Tool Depth

99170 N/A 1.735 in44.07 mm N/A 1.742 in44.25 mm N/A 0.375 in9.5 mm N/A 1/2 in12.7 mm N/A 1.032 in26.2 mm
99172 N/A 1.745 in44.32 mm N/A 1.753 in44.53 mm N/A 0.375 in9.5 mm N/A 1/2 in12.7 mm N/A 1.032 in26.2 mm
99173 N/A 1.745 in44.32 mm N/A 1.753 in44.53 mm N/A 0.875 in22.2 mm N/A 1 in25.4 mm N/A 1.032 in26.2 mm
99174 N/A 1.745 in44.32 mm N/A 1.753 in44.53 mm N/A 0.562 in14.3 mm N/A 0.688 in17.5 mm N/A 1.032 in26.2 mm
99175 N/A 1.745 in44.32 mm N/A 1.753 in44.53 mm N/A 0.750 in19.1 mm N/A 7/8 in22.2 mm N/A 1.032 in26.2 mm
99176 N/A 1.759 in44.68 mm N/A 1.767 in44.88 mm N/A 0.562 in14.3 mm N/A 0.688 in17.5 mm N/A 1.032 in26.2 mm
99177 N/A 1.767 in44.88 mm N/A 1.775 in45.09 mm N/A 0.550 in14.0 mm N/A 0.669 in17.0 mm N/A 1.032 in26.2 mm
99181 N/A 1.807 in45.90 mm N/A 1.815 in46.10 mm N/A 0.562 in14.3 mm N/A 0.688 in17.5 mm N/A 1.250 in31.8 mm
99187 N/A 1.869 in47.47 mm N/A 1.878 in47.70 mm N/A 0.562 in14.3 mm N/A 0.688 in17.5 mm N/A 1.250 in31.8 mm
99189 N/A 1.887 in47.93 mm N/A 1.893 in48.08 mm N/A 0.550 in14.0 mm N/A 0.668 in17.0 mm N/A 0.984 in25.0 mm
99192 N/A 1.909 in48.49 mm N/A 1.915 in48.64 mm N/A 0.375 in9.5 mm N/A 1/2 in12.7 mm N/A 1.000 in25.4 mm
99193 N/A 1.932 in49.07 mm N/A 1.940 in49.28 mm N/A 0.562 in14.3 mm N/A 0.688 in17.5 mm N/A 1.250 in31.8 mm
99196 N/A 1.965 in49.91 mm N/A 1.971 in50.06 mm N/A 0.550 in14.0 mm N/A 0.668 in17.0 mm N/A 0.984 in25.0 mm
99199 N/A 1.996 in50.70 mm N/A 2.003 in50.88 mm N/A 0.562 in14.3 mm N/A 0.688 in17.5 mm N/A 2.060 in52.3 mm
99200 N/A 1.996 in50.70 mm N/A 2.003 in50.88 mm N/A 0.875 in22.23 mm N/A 1 in25.4 mm N/A 2.060 in52.32 mm
99205 N/A 2.057 in52.25 mm N/A 2.063 in52.40 mm N/A 0.813 in20.65 mm N/A 0.938 in23.83 mm N/A 1.375 in34.93 mm
99210 N/A 2.122 in53.90 mm N/A 2.128 in54.05 mm N/A 0.500 in12.7 mm N/A 3/4 in19.05 mm N/A 1.280 in32.51 mm
99212 N/A 2.122 in53.90 mm N/A 2.130 in54.10 mm N/A 0.780 in19.81 mm N/A 0.937 in23.8 mm N/A 1.375 in34.93 mm
99218 N/A 2.185 in55.50 mm N/A 2.192 in55.68 mm N/A 0.781 in19.8 mm N/A 0.938 in23.8 mm N/A 1.312 in33.3 mm
99220 N/A 2.198 in55.83 mm N/A 2.205 in56.01 mm N/A 0.500 in12.7 mm N/A 5/8 in15.9 mm N/A 1.312 in33.3 mm
99225 N/A 2.248 in57.10 mm N/A 2.255 in57.28 mm N/A 0.780 in19.8 mm N/A 0.937 in23.8 mm N/A 1.375 in34.9 mm
99227 N/A 2.249 in57.12 mm N/A 2.255 in57.28 mm N/A 0.303 in7.7 mm N/A 0.438 in11.1 mm N/A 1.312 in33.3 mm
99235 N/A 2.359 in59.92 mm N/A 2.365 in60.07 mm N/A 0.787 in20.0 mm N/A 0.905 in23.0 mm N/A 1.375 in34.9 mm
99237 N/A 2.372 in60.25 mm N/A 2.378 in60.40 mm N/A 0.780 in19.8 mm N/A 0.937 in23.8 mm N/A 1.375 in34.9 mm
99238 N/A 2.372 in60.25 mm N/A 2.378 in60.40 mm N/A 0.594 in15.1 mm N/A 3/4 in19.1 mm N/A 1.375 in34.9 mm
26 - 50 of 129 | Results Per Page | View | Unit of Measure
 1 2 3 4 5 »  

Daemar at a Glance

Managing the sourcing & delivery of millions of Essential Components to the manufacturing & MRO marketplace.

Four locations across North America:

Daemar Canada

Daemar USA

ISO-9001 Registered QMS

Copyright 2016, Daemar Inc. | Design by Persona Corp.