1.800.387.7115

1.877.432.3627

DMR Sleeves are precision stainless steel wear sleeves designed to prolong the life of damaged shafts and yokes by providing a new sealing surface that is superior to most original finishes and materials. Over time sealing lips can groove shafts due to factors such as dirt, heat, excessive water, lack of lubrication and high shaft speeds. DMR Sleeves offer a cost effective alternative to resizing, metalizing or replacing severely damaged surfaces. DMR Sleeve's low profile design means that the same size seal can be utilized and multi-lip oil seals can be accommodated.
51 - 75 of 129 | Results Per Page | View | Unit of Measure
 1 2 3 4 5 »  

Daemar P/N

Minimum Shaft Diameter

Maximum Shaft Diameter

Width

Length

Instal Tool Depth

99240 N/A 2.374 in60.30 mm N/A 2.380 in60.45 mm N/A 0.526 in13.4 mm N/A 0.683 in17.3 mm N/A 1.375 in34.9 mm
99241 N/A 2.359 in59.92 mm N/A 2.365 in60.07 mm N/A 0.370 in9.4 mm N/A 0.450 in11.4 mm N/A 1.375 in34.9 mm
99242 N/A 2.435 in61.85 mm N/A 2.441 in62.00 mm N/A 0.500 in12.7 mm N/A 5/8 in15.9 mm N/A 1.425 in36.2 mm
99243 N/A 2.434 in61.82 mm N/A 2.440 in61.98 mm N/A 0.781 in19.8 mm N/A 0.938 in23.8 mm N/A 1.393 in35.4 mm
99244 N/A 2.433 in61.80 mm N/A 2.441 in62.00 mm N/A 0.500 in12.7 mm N/A 5/8 in15.9 mm N/A 1.425 in36.2 mm
99248 N/A 2.497 in63.42 mm N/A 2.506 in63.65 mm N/A 0.500 in12.7 mm N/A 0.656 in16.7 mm N/A 1.393 in35.4 mm
99249 N/A 2.487 in63.17 mm N/A 2.506 in63.65 mm N/A 0.780 in19.8 mm N/A 0.937 in23.8 mm N/A 1.393 in35.4 mm
99250 N/A 2.497 in63.42 mm N/A 2.506 in63.65 mm N/A 0.780 in19.81 mm N/A 0.937 in23.8 mm N/A 1.375 in34.93 mm
99251 N/A 2.509 in63.73 mm N/A 2.516 in63.91 mm N/A 0.780 in19.81 mm N/A 0.906 in23.01 mm N/A 1.375 in34.93 mm
99253 N/A 2.497 in63.42 mm N/A 2.506 in63.65 mm N/A 0.555 in14.1 mm N/A .650 in16.51 mm N/A 0.890 in22.61 mm
99254 N/A 2.554 in64.87 mm N/A 2.562 in65.07 mm N/A 0.787 in20.0 mm N/A 0.905 in23.0 mm N/A 1.375 in34.9 mm
99256 N/A 2.559 in65.00 mm N/A 2.566 in65.18 mm N/A 0.781 in19.8 mm N/A 0.938 in23.8 mm N/A 1.375 in34.9 mm
99259 N/A 2.595 in65.91 mm N/A 2.601 in66.07 mm N/A 0.781 in19.8 mm N/A 0.938 in23.8 mm N/A 1.250 in31.8 mm
99261 N/A 2.618 in66.50 mm N/A 2.624 in66.65 mm N/A 0.781 in19.8 mm N/A 0.938 in23.8 mm N/A 1.375 in34.9 mm
99262 N/A 2.623 in66.62 mm N/A 2.631 in66.83 mm N/A 0.780 in19.81 mm N/A 0.937 in23.8 mm N/A 1.500 in38.1 mm
99264 N/A 2.620 in66.55 mm N/A 2.627 in66.73 mm N/A 0.780 in19.8 mm N/A 0.906 in23.0 mm N/A 1.500 in38.1 mm
99272 N/A 2.750 in69.85 mm N/A 2.756 in70.00 mm N/A 0.406 in10.3 mm N/A 0.563 in14.3 mm N/A 1.250 in31.8 mm
99274 N/A 2.743 in69.67 mm N/A 2.751 in69.88 mm N/A 0.780 in19.8 mm N/A 0.937 in23.8 mm N/A 1.375 in34.9 mm
99275 N/A 2.748 in69.80 mm N/A 2.756 in70.00 mm N/A 0.780 in19.8 mm N/A 0.937 in23.8 mm N/A 1.375 in34.9 mm
99276 N/A 2.750 in69.85 mm N/A 2.759 in70.08 mm N/A 0.787 in20.0 mm N/A 0.945 in24.0 mm N/A 1.375 in34.9 mm
99282 N/A 2.837 in72.06 mm N/A 2.844 in72.24 mm N/A 0.500 in12.7 mm N/A 0.656 in16.7 mm N/A 1.250 in31.8 mm
99284 N/A 2.826 in71.78 mm N/A 2.836 in72.03 mm N/A 0.748 in19.0 mm N/A 0.868 in22.0 mm N/A 1.339 in34.0 mm
99287 N/A 2.871 in72.92 mm N/A 2.879 in73.13 mm N/A 0.780 in19.8 mm N/A 0.937 in23.8 mm N/A 1.375 in34.9 mm
99293 N/A 2.935 in74.55 mm N/A 2.943 in74.75 mm N/A 0.780 in19.8 mm N/A 0.938 in23.8 mm N/A 1.500 in38.1 mm
99294 N/A 2.949 in74.90 mm N/A 2.956 in75.08 mm N/A 0.866 in22.0 mm N/A 1.024 in26.0 mm N/A 1.312 in33.3 mm
51 - 75 of 129 | Results Per Page | View | Unit of Measure
 1 2 3 4 5 »  

Daemar at a Glance

Managing the sourcing & delivery of millions of Essential Components to the manufacturing & MRO marketplace.

Four locations across North America:

Daemar Canada

Daemar USA

ISO-9001 Registered QMS

Copyright 2016, Daemar Inc. | Design by Persona Corp.