1.800.387.7115

1.877.432.3627

DMR Sleeves are precision stainless steel wear sleeves designed to prolong the life of damaged shafts and yokes by providing a new sealing surface that is superior to most original finishes and materials. Over time sealing lips can groove shafts due to factors such as dirt, heat, excessive water, lack of lubrication and high shaft speeds. DMR Sleeves offer a cost effective alternative to resizing, metalizing or replacing severely damaged surfaces. DMR Sleeve's low profile design means that the same size seal can be utilized and multi-lip oil seals can be accommodated.
76 - 100 of 129 | Results Per Page | View | Unit of Measure
 1 2 3 4 5 »  

Daemar P/N

Minimum Shaft Diameter

Maximum Shaft Diameter

Width

Length

Instal Tool Depth

99299 N/A 2.987 in75.87 mm N/A 2.996 in76.10 mm N/A 0.812 in20.6 mm N/A 1 in25.4 mm N/A 1.250 in31.8 mm
99300 N/A 2.998 in76.15 mm N/A 3.006 in76.35 mm N/A 0.812 in20.6 mm N/A 1 in25.4 mm N/A 1.281 in32.5 mm
99303 N/A 2.998 in76.15 mm N/A 3.006 in76.35 mm N/A 0.625 in15.9 mm N/A 0.812 in20.6 mm N/A 1.063 in27.0 mm
99307 N/A 3.123 in79.32 mm N/A 3.132 in79.55 mm N/A 0.550 in14.0 mm N/A 0.709 in18.0 mm N/A 2.031 in51.6 mm
99311 N/A 3.119 in79.22 mm N/A 3.126 in79.40 mm N/A 0.688 in17.5 mm N/A 0.813 in20.7 mm N/A 2.000 in50.8 mm
99312 N/A 3.119 in79.22 mm N/A 3.126 in79.40 mm N/A 0.812 in20.6 mm N/A 1 in25.4 mm N/A 2.000 in50.8 mm
99313 N/A 3.141 in79.78 mm N/A 3.150 in80.01 mm N/A 0.750 in19.1 mm N/A 0.886 in22.5 mm N/A 1.375 in34.9 mm
99315 N/A 3.145 in79.88 mm N/A 3.153 in80.09 mm N/A 0.827 in21.0 mm N/A 0.945 in24.0 mm N/A 1.375 in34.9 mm
99317 N/A 3.145 in79.88 mm N/A 3.153 in80.09 mm N/A 0.433 in11.0 mm N/A 0.591 in15.0 mm N/A 1.375 in34.9 mm
99322 N/A 3.246 in82.45 mm N/A 3.253 in82.63 mm N/A 0.812 in20.6 mm N/A 1 in25.4 mm N/A 1.375 in34.9 mm
99324 N/A 3.248 in82.50 mm N/A 3.256 in82.70 mm N/A 0.595 in15.1 mm N/A 0.720 in18.3 mm N/A 1.500 in38.1 mm
99325 N/A 3.248 in82.50 mm N/A 3.256 in82.70 mm N/A 0.812 in20.6 mm N/A 1 in25.4 mm N/A 1.500 in38.1 mm
99332 N/A 3.337 in84.76 mm N/A 3.347 in85.01 mm N/A 0.669 in17.0 mm N/A 0.827 in21.0 mm N/A 1.378 in35.0 mm
99333 N/A 3.337 in84.76 mm N/A 3.347 in85.01 mm N/A 0.827 in21.0 mm N/A 0.894 in22.7 mm N/A 1.378 in35.0 mm
99337 N/A 3.371 in85.62 mm N/A 3.379 in85.83 mm N/A 0.812 in20.6 mm N/A 1 in25.4 mm N/A 1.500 in38.1 mm
99346 N/A 3.495 in88.77 mm N/A 3.503 in88.98 mm N/A 0.625 in15.9 mm N/A 0.812 in20.6 mm N/A 1.348 in34.2 mm
99347 N/A 3.498 in88.85 mm N/A 3.506 in89.05 mm N/A 0.312 in7.9 mm N/A 1/2 in12.7 mm N/A 1.348 in34.2 mm
99349 N/A 3.499 in88.87 mm N/A 3.507 in89.08 mm N/A 0.625 in15.9 mm N/A 0.812 in20.6 mm N/A 1.348 in34.2 mm
99350 N/A 3.498 in88.85 mm N/A 3.506 in89.05 mm N/A 0.812 in20.6 mm N/A 1 in25.4 mm N/A 1.347 in34.2 mm
99351 N/A 3.540 in89.92 mm N/A 3.546 in90.07 mm N/A 0.710 in18.0 mm N/A 0.906 in23.0 mm N/A 1.812 in46.0 mm
99353 N/A 3.540 in89.92 mm N/A 3.546 in90.07 mm N/A 0.526 in13.4 mm N/A 0.667 in16.9 mm N/A 1.750 in44.5 mm
99354 N/A 3.540 in89.92 mm N/A 3.546 in90.07 mm N/A 0.906 in23.0 mm N/A 1.102 in28.0 mm N/A 1.750 in44.5 mm
99356 N/A 3.560 in90.42 mm N/A 3.566 in90.58 mm N/A 0.812 in20.6 mm N/A 1 in25.4 mm N/A 1.750 in44.5 mm
99360 N/A 3.618 in91.90 mm N/A 3.624 in92.05 mm N/A 0.812 in20.6 mm N/A 1 in25.4 mm N/A 1.750 in44.5 mm
99362 N/A 3.622 in92.00 mm N/A 3.629 in92.18 mm N/A 0.812 in20.6 mm N/A 1 in25.4 mm N/A 1.750 in44.5 mm
76 - 100 of 129 | Results Per Page | View | Unit of Measure
 1 2 3 4 5 »  

Daemar at a Glance

Managing the sourcing & delivery of millions of Essential Components to the manufacturing & MRO marketplace.

Four locations across North America:

Daemar Canada

Daemar USA

ISO-9001 Registered QMS

Copyright 2016, Daemar Inc. | Design by Persona Corp.