1.800.387.7115

1.877.432.3627

DMR 3 foot unplated round steel shafts are made from bar-quality cold drawn steel - 50% stronger than hotrolled mild steel - which can be drilled and have keyways cut. Just right for furnace blower shafts, ventilator shafts, axles, farm equipment drive shafts and many uses you will discover yourself. Each shaft has a colddrawn finish for use with brass, bronze copper or aluminum bushings. Bar ends are machine-cut, not sheared.
Tolerances will run plus .000" to minus .002"
1 - 19 of 19 | Results Per Page | View | Unit of Measure
1 

Daemar P/N

Diameter

Weight of Bundle

0.125-36-RND N/A .125 in N/A 0.38 lb
0.188-36-RND N/A 3/16 in N/A 0.85 lb
0.250-36-RND N/A .250 in N/A 1.50 lb
0.313-36-RND N/A 5/16 in N/A 2.34 lb
0.375-36-RND N/A .375 in N/A 3.38 lb
0.438-36-RND N/A 7/16 in N/A 4.60 lb
0.500-36-RND N/A .500 in N/A 6.00 lb
0.563-36-RND N/A 9/16 in N/A 7.62 lb
0.625-36-RND N/A 5/8 in N/A 9.39 lb
0.750-36-RND N/A 3/4 in N/A 13.50 lb
0.875-36-RND N/A 7/8 in N/A 18.42 lb
0.938-36-RND N/A 15/16 in N/A 21.00 lb
1.000-36-RND N/A 1 in N/A 24.00 lb
1.125-36-RND N/A 1 1/8 in N/A 30.42 lb
1.188-36-RND N/A 1 3/16 in N/A 34.11 lb
1.250-36-RND N/A 1 1/4 in N/A 37.50 lb
1.375-36-RND N/A 1 3/8 in N/A 46.11 lb
1.438-36-RND N/A 1 7/16 in N/A 49.50 lb
1.500-36-RND N/A 1 1/2 in N/A 54.00 lb
1 - 19 of 19 | Results Per Page | View | Unit of Measure
1 

Daemar at a Glance

Managing the sourcing & delivery of millions of Essential Components to the manufacturing & MRO marketplace.

Four locations across North America:

Daemar Canada

Daemar USA

ISO-9001 Registered QMS

Copyright 2016, Daemar Inc. | Design by Persona Corp.