1.800.387.7115

1.877.432.3627

DMR ™ gib head keys are used for holding pulleys and gears tightly on the shaft. They are tapered 1/8" per foot to fit snugly on the shaft and are machined from 1018 steel.
26 - 31 of 31 | Results Per Page | View | Unit of Measure
1 2 

Daemar P/N

A

B

Length

C

D

Wt. Per 100

N/A .625 in N/A 0.625 in N/A 4 in N/A 1.000 in N/A 0.750 in N/A 55.90 lb
N/A .625 in N/A 0.625 in N/A 6 in N/A 1.000 in N/A 0.750 in N/A 75.30 lb
N/A .75 in N/A .75 in N/A 5 in N/A 1.125 in N/A 7/8 in N/A 97.60 lb
N/A .75 in N/A .75 in N/A 6 in N/A 1.125 in N/A 7/8 in N/A 110.00 lb
N/A 0.875 in N/A .875 in N/A 6 in N/A 1.250 in N/A 1.000 in N/A 156.00 lb
N/A 1.000 in N/A 1.00 in N/A 6 in N/A 1.500 in N/A 1.125 in N/A 211.00 lb
26 - 31 of 31 | Results Per Page | View | Unit of Measure
1 2 

Daemar at a Glance

Managing the sourcing & delivery of millions of Essential Components to the manufacturing & MRO marketplace.

Four locations across North America:

Daemar Canada

Daemar USA

ISO-9001 Registered QMS

Copyright 2016, Daemar Inc. | Design by Persona Corp.