Daemar Inc. - Brass Shim Rolls
Daemar Inc.
buttons  
 
Search Catalog
      GO   
 All Categories    Brass Shim Rolls
All Categories > Shim Stock > Shim Stock Rolls > Brass Shim Rolls > View Items 
    Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Brass Shim Rolls

 
Check up to five results to perform an action.

DMR Shim Roll Brass

larger image 		DMR Brass Shim Stock is used where some stiffness is required and where corrosion problems exist. It has been cold rolled to a 1/2 hard temper with a tensile strength of appox. 62,000 PSI. Brass Shim Stock is 70% Copper & 30% Zinc. It has a Rockwell hardness of 30T 56/68.

Brass Shim Stock meets the following specifications: SAE-CA 260,ASTM-B-36, AMS-4507 & QQB-613-#2. Typical weight : .010” X 6” X 100” 1.8 lbs.


Request InformationCompare Items   Results Per Page : 
  Results 1 - 24 of 24 1 

Item #

Thickness

Thickness - Tolerance

Rolls

Width

Width - Tolerance

20001-001 0.0010 in ± 10% 6 x 100 in 6 in ± .008 in
20805-015 0.0015 in ± 10% 6 x 100 in 6 in ± .008 in
20002-002 0.0020 in ± 10% 6 x 100 in 6 in ± .008 in
20003-003 0.0030 in ± 10% 6 x 100 in 6 in ± .008 in
20004-004 0.0040 in ± .0003 in 6 x 100 in 6 in ± .008 in
20005-005 0.0050 in ± .0004 in 6 x 100 in 6 in ± .008 in
20006-006 0.0060 in ± .0004 in 6 x 100 in 6 in ± .008 in
20007-007 0.0070 in ± .0006 in 6 x 100 in 6 in ± .008 in
20008-008 0.0080 in ± .0006 in 6 x 100 in 6 in ± .008 in
20009-009 0.0090 in ± .0006 in 6 x 100 in 6 in ± .008 in
20010-010 0.0100 in ± .0008 in 6 x 100 in 6 in ± .008 in
20012-012 0.0120 in ± .0008 in 6 x 100 in 6 in ± .008 in
20015-015 0.0150 in ± .0010 in 6 x 100 in 6 in ± .008 in
20020-020 0.0200 in ± .0013 in 6 x 100 in 6 in ± .008 in
20025-025 0.0250 in ± .002 in 6 x 100 in 6 in ± .008 in
20031-031 0.0310 in ± .002 in 6 x 100 in 6 in ± .008 in
22001-001 0.0010 in ± 10% 12 x 120 in 12 in ± .008 in
22002-002 0.0020 in ± 10% 12 x 120 in 12 in ± .008 in
22003-003 0.0030 in ± 10% 12 x 120 in 12 in ± .008 in
22004-004 0.0040 in ± .0006 in 12 x 120 in 12 in ± .008 in
22005-005 0.0050 in ± .0008 in 12 x 120 in 12 in ± .008 in
22006-006 0.0060 in ± .0008 in 12 x 120 in 12 in ± .008 in
22008-008 0.0080 in ± .0010 in 12 x 120 in 12 in ± .008 in
22010-010 0.0100 in ± .0013 in 12 x 120 in 12 in ± .008 in
  Results 1 - 24 of 24 1 
| SITE MAP | WHATS NEW | ABOUT US | PRODUCTS | SERVICE | CONTACT US | RESOURCES |


Copyright © 1996-2007. All rights reserved.
Daemar® Inc. / DMR™ / Fiber-Lube™ / Quick-Turn™ are trademarks of
Daemar® Inc. All material on the site, including, without limitation,
text, logo, software, photos, video, graphics, music, and sound, are
protected by copyright laws, both as individual works and as a
collection. No reproduction authorized in any form electronic or
otherwise without specific written permission.

This site includes links to other internet sites solely as a convenience
to users. Daemar, Inc. does not endorse any such linked sites or the
information, material, products and services offered.

whatsnewaboutusProductsservicescontactusresources