1.800.387.7115

1.877.432.3627

Once installed in the groove of a shaft. the portion of the ring protruding from the groove (also called a "shoulder") holds an assembly in place.

Material Finish: Zinc Bright  

Material Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)

This standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting.


Size Range: 3 mm - 400 mm

The radius "R" on the load side must not exceed 0.1 T.

DIN-471/D1400 (DSH)

1 - 25 of 194 | Results Per Page | View |
 1 2 3 4 5 »  

Daemar P/N

Shaft Diameter - Ds

Groove Diameter - Dg

Groove Width - W min

Groove Depth - d

Ring Thickness - T

Ring Free Diameter - Df

DSH-003-ZF N/A 3.0 mm N/A 2.80 mm N/A 0.50 mm N/A 0.10 mm N/A 0.40 mm N/A 2.70 mm
DSH-004-ZF N/A 4.0 mm N/A 3.80 mm N/A 0.50 mm N/A 0.10 mm N/A 0.40 mm N/A 3.70 mm
DSH-005-ZF N/A 5.0 mm N/A 4.80 mm N/A 0.70 mm N/A 0.10 mm N/A 0.60 mm N/A 4.70 mm
DSH-006-ZF N/A 6.0 mm N/A 5.70 mm N/A 0.80 mm N/A 0.15 mm N/A 0.70 mm N/A 5.60 mm
DSH-007-ZF N/A 7.0 mm N/A 6.70 mm N/A 0.90 mm N/A 0.15 mm N/A 0.80 mm N/A 6.50 mm
DSH-008-ZF N/A 8.0 mm N/A 7.60 mm N/A 0.90 mm N/A 0.20 mm N/A 0.80 mm N/A 7.40 mm
DSH-009-ZF N/A 9.0 mm N/A 8.60 mm N/A 1.10 mm N/A 0.20 mm N/A 1.00 mm N/A 8.40 mm
DSH-010-ZF N/A 10.0 mm N/A 9.60 mm N/A 1.10 mm N/A 0.20 mm N/A 1.00 mm N/A 9.30 mm
DSH-011-ZF N/A 11.0 mm N/A 10.50 mm N/A 1.10 mm N/A 0.25 mm N/A 1.00 mm N/A 10.20 mm
DSH-012-ZF N/A 12.0 mm N/A 11.50 mm N/A 1.10 mm N/A 0.25 mm N/A 1.00 mm N/A 11.00 mm
DSH-013-ZF N/A 13.0 mm N/A 12.40 mm N/A 1.10 mm N/A 0.30 mm N/A 1.00 mm N/A 11.90 mm
DSH-014-ZF N/A 14.0 mm N/A 13.40 mm N/A 1.10 mm N/A 0.30 mm N/A 1.00 mm N/A 12.90 mm
DSH-015-ZF N/A 15.0 mm N/A 14.30 mm N/A 1.10 mm N/A 0.35 mm N/A 1.00 mm N/A 13.80 mm
DSH-016-ZF N/A 16.0 mm N/A 15.20 mm N/A 1.10 mm N/A 0.40 mm N/A 1.00 mm N/A 14.70 mm
DSH-017-ZF N/A 17.0 mm N/A 16.20 mm N/A 1.10 mm N/A 0.40 mm N/A 1.00 mm N/A 15.70 mm
DSH-018-ZF N/A 18.0 mm N/A 17.00 mm N/A 1.30 mm N/A 0.50 mm N/A 1.20 mm N/A 16.50 mm
DSH-019-ZF N/A 19.0 mm N/A 18.00 mm N/A 1.30 mm N/A 0.50 mm N/A 1.20 mm N/A 17.50 mm
DSH-020-ZF N/A 20.0 mm N/A 19.00 mm N/A 1.30 mm N/A 0.50 mm N/A 1.20 mm N/A 18.50 mm
DSH-021-ZF N/A 21.0 mm N/A 20.00 mm N/A 1.30 mm N/A 0.50 mm N/A 1.20 mm N/A 19.50 mm
DSH-022-ZF N/A 22.0 mm N/A 21.00 mm N/A 1.30 mm N/A 0.50 mm N/A 1.20 mm N/A 20.50 mm
DSH-023-ZF N/A 23.0 mm N/A 22.00 mm N/A 1.30 mm N/A 0.50 mm N/A 1.20 mm N/A 21.50 mm
DSH-024-ZF N/A 24.0 mm N/A 22.90 mm N/A 1.30 mm N/A 0.55 mm N/A 1.20 mm N/A 22.20 mm
DSH-025-ZF N/A 25.0 mm N/A 23.90 mm N/A 1.30 mm N/A 0.55 mm N/A 1.20 mm N/A 23.20 mm
DSH-026-ZF N/A 26.0 mm N/A 24.90 mm N/A 1.30 mm N/A 0.55 mm N/A 1.20 mm N/A 24.20 mm
DSH-027-ZF N/A 27.0 mm N/A 25.60 mm N/A 1.30 mm N/A 0.70 mm N/A 1.20 mm N/A 24.90 mm
1 - 25 of 194 | Results Per Page | View |
 1 2 3 4 5 »  

Daemar at a Glance

Managing the sourcing & delivery of millions of Essential Components to the manufacturing & MRO marketplace.

Four locations across North America:

Daemar Canada

Daemar USA

ISO-9001 Registered QMS

Copyright 2016, Daemar Inc. | Design by Persona Corp.