1.800.387.7115

1.877.432.3627

Applicators are designed to install standard radial retaining rings on a shaft. Used with Dispensers, applicators enable operators to install rings quickly and correctly (ring “snaps” when properly seated in groove.)
For use with Retaining Rings C Rings 
*45 ° deg, 90 ° deg and Offset applicators for C,E,RE Retaining Rings- Replace the Last "0" of the Applicator designation with a "4"(45 °), "9" (90°) or "7" (Offset)
(Eg , A-304, A309, A-307 etc.)
** Please Wear Protective eyeware while intsalling and removing retaining ring & hose clamps.**

1 - 24 of 24 | Results Per Page | View | Unit of Measure
1 

Daemar P/N

Ring Size

Blade Width A

Blade Width B

Tip Length C

Offset D

Rotor Clip P/N

A-300 N/A C-0012 N/A 0.264 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-300
A-080 N/A C-0015 N/A 0.5 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-080
A-090 N/A C-0018 N/A 0.5 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-090
A-310 N/A C-0021 N/A 0.5 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-310
A-320 N/A C-0023 N/A 0.5 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-320
A-330 N/A C-0025 N/A 0.5 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-330
A-340 N/A C-0028 N/A 0.5 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-340
A-350 N/A C-0031 N/A 0.5 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-350
A-360 N/A C-0037 N/A 0.812 N/A 2.218 N/A 0.593 N/A 0.625 N/A A-360
A-370 N/A C-0040 N/A 0.812 N/A 2.218 N/A 0.593 N/A 0.625 N/A A-370
A-380 N/A C-0043 N/A 0.812 N/A 2.218 N/A 0.593 N/A 0.625 N/A A-380
A-290 N/A C-0050 N/A 0.812 N/A 2.218 N/A 0.593 N/A 0.625 N/A A-290
A-390 N/A C-0056 N/A 0.812 N/A 2.218 N/A 0.593 N/A 0.625 N/A A-390
A-400 N/A C-0062 N/A 1.125 N/A 2.39 N/A 0.765 N/A 0.625 N/A A-400
A-410 N/A C-0068 N/A 1.125 N/A 2.39 N/A 0.765 N/A 0.625 N/A A-410
A-280 N/A C-0075 N/A 1.125 N/A 2.39 N/A 0.765 N/A 0.625 N/A A-280
A-420 N/A C-0081 N/A 1.125 N/A 2.39 N/A 0.765 N/A 0.625 N/A A-420
A-430 N/A C-0087 N/A 1.125 N/A 2.39 N/A 0.765 N/A 0.625 N/A A-430
A-440 N/A C-0093 N/A 1.562 N/A 2.625 N/A 0.969 N/A 0.625 N/A A-440
A-450 N/A C-0100 N/A 1.562 N/A 2.625 N/A 0.969 N/A 0.625 N/A A-450
A-460 N/A C-0112 N/A 1.562 N/A 2.625 N/A 0.969 N/A 0.625 N/A A-460
A-470 N/A C-0125 N/A 1.562 N/A 2.625 N/A 0.969 N/A 0.625 N/A A-470
A-480 N/A C-0137 N/A 1.562 N/A 1.875 N/A 1.188 N/A 0.625 N/A A-480
A-490 N/A C-0150 N/A 1.562 N/A 1.875 N/A 1.188 N/A 0.625 N/A A-490
1 - 24 of 24 | Results Per Page | View | Unit of Measure
1 

Daemar at a Glance

Managing the sourcing & delivery of millions of Essential Components to the manufacturing & MRO marketplace.

Four locations across North America:

Daemar Canada

Daemar USA

ISO-9001 Registered QMS

Copyright 2016, Daemar Inc. | Design by Persona Corp.