1.800.387.7115

1.877.432.3627

Applicators are designed to install standard radial retaining rings on a shaft. Used with Dispensers, applicators enable operators to install rings quickly and correctly (ring “snaps” when properly seated in groove.)
For use with Retaining Rings E/SE/YE
*45 ° deg, 90 ° deg and Offset applicators for C,E,RE Retaining Rings- Replace the Last "0" of the Applicator designation with a "4"(45 °), "9" (90°) or "7" (Offset)
(Eg , A-304, A309, A-307 etc.)
** Please Wear Protective eyeware while intsalling and removing retaining ring & hose clamps.**

1 - 25 of 29 | Results Per Page | View | Unit of Measure
1 2 

Daemar P/N

Ring Size

Blade Width A

Blade Width B

Tip Length C

Offset D

Rotor Clip P/N

N/A E-0004 N/A 0.265 N/A 1.438 N/A 0.375 N/A 0.25 N/A A-010
N/A SE-0006 N/A 0.265 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-020
N/A YE-0006 N/A 0.5 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-030
N/A E-0006 N/A 0.265 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-040
N/A SE-0009 N/A 0.5 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-050
N/A E-0009 N/A 0.5 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-510
N/A SE-0011 N/A 0.5 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-060
N/A E-0012 N/A 0.5 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-050
N/A SE-0014 N/A 0.5 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-080
N/A YE-0014 N/A 0.5 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-090
N/A E-0014 N/A 0.5 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-070
N/A E-0015 N/A 0.5 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-100
N/A SE-0017 N/A 0.5 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-110
N/A SE-0018 N/A 0.5 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-130
N/A E-0018 N/A 0.5 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-120
N/A SE-0021 N/A 0.812 N/A 2.218 N/A 0.593 N/A 0.625 N/A A-140
N/A E-0025 N/A 0.812 N/A 2.218 N/A 0.593 N/A 0.625 N/A A-150
N/A SE-0031 N/A 0.812 N/A 2.218 N/A 0.593 N/A 0.625 N/A A-160
N/A SE-0037 N/A 0.812 N/A 2.218 N/A 0.593 N/A 0.625 N/A A-290
N/A E-0037 N/A 0.812 N/A 2.218 N/A 0.593 N/A 0.625 N/A A-170
N/A E-0043 N/A 0.812 N/A 2.218 N/A 0.593 N/A 0.625 N/A A-180
N/A SE-0043 N/A 0.812 N/A 2.218 N/A 0.593 N/A 0.625 N/A A-190
N/A E-0050 N/A 1.125 N/A 2.39 N/A 0.765 N/A 0.625 N/A A-200
N/A E-0062 N/A 1.125 N/A 2.39 N/A 0.765 N/A 0.625 N/A A-210
N/A SE-0074 N/A 1.562 N/A 2.625 N/A 0.969 N/A 0.625 N/A A-220
1 - 25 of 29 | Results Per Page | View | Unit of Measure
1 2 

Daemar at a Glance

Managing the sourcing & delivery of millions of Essential Components to the manufacturing & MRO marketplace.

Four locations across North America:

Daemar Canada

Daemar USA

ISO-9001 Registered QMS

Copyright 2016, Daemar Inc. | Design by Persona Corp.