1.800.387.7115

1.877.432.3627

Applicators are designed to install standard radial retaining rings on a shaft. Used with Dispensers, applicators enable operators to install rings quickly and correctly (ring “snaps” when properly seated in groove.)
For use with Retaining Rings PO/POL Rings 
*45 ° deg, 90 ° deg and Offset applicators for C,E,RE Retaining Rings- Replace the Last "0" of the Applicator designation with a "4"(45 °), "9" (90°) or "7" (Offset)
(Eg , A-304, A309, A-307 etc.)
** Please Wear Protective eyeware while intsalling and removing retaining ring & hose clamps.**

1 - 14 of 14 | Results Per Page | View | Unit of Measure
1 

Daemar P/N

Ring Size

Blade Width A

Blade Width B

Tip Length C

Offset D

Rotor Clip P/N

A-815 N/A PO-0015 N/A 0.5 N/A 1.438 N/A 0.375 N/A 0.625 N/A A-815
A-818 N/A PO-0018 N/A 0.812 N/A 2.218 N/A 0.593 N/A 0.625 N/A A-818
A-825 N/A PO-0025 N/A 0.812 N/A 2.218 N/A 0.593 N/A 0.625 N/A A-825
A-831 N/A PO-0031 N/A 0.812 N/A 2.218 N/A 0.593 N/A 0.625 N/A A-831
A-837 N/A PO-0037 N/A 1.125 N/A 2.39 N/A 0.765 N/A 0.625 N/A A-837
A-843 N/A PO-0043 N/A 1.125 N/A 2.39 N/A 0.765 N/A 0.625 N/A A-843
A-850 N/A PO-0050 N/A 1.125 N/A 2.39 N/A 0.765 N/A 0.625 N/A A-850
A-915 N/A POL-0015 N/A 0.5 N/A 1.438 N/A 0.375 N/A 0.625 N/A A-915
A-918 N/A POL-0018 N/A 0.812 N/A 2.218 N/A 0.593 N/A 0.625 N/A A-918
A-925 N/A POL-0025 N/A 0.812 N/A 2.218 N/A 0.593 N/A 0.625 N/A A-925
A-931 N/A POL-0031 N/A 0.812 N/A 2.218 N/A 0.593 N/A 0.625 N/A A-931
A-937 N/A POL-0037 N/A 1.125 N/A 2.39 N/A 0.765 N/A 0.625 N/A A-937
A-943 N/A POL-0043 N/A 1.125 N/A 2.39 N/A 0.765 N/A 0.625 N/A A-943
A-950 N/A POL-0050 N/A 1.125 N/A 2.39 N/A 0.765 N/A 0.625 N/A A-950
1 - 14 of 14 | Results Per Page | View | Unit of Measure
1 

Daemar at a Glance

Managing the sourcing & delivery of millions of Essential Components to the manufacturing & MRO marketplace.

Four locations across North America:

Daemar Canada

Daemar USA

ISO-9001 Registered QMS

Copyright 2016, Daemar Inc. | Design by Persona Corp.