1.800.387.7115

1.877.432.3627

Applicators are designed to install standard radial retaining rings on a shaft. Used with Dispensers, applicators enable operators to install rings quickly and correctly (ring “snaps” when properly seated in groove.)
For use with Retaining Rings DE Rings 
*45 ° deg, 90 ° deg and Offset applicators for C,E,RE Retaining Rings- Replace the Last "0" of the Applicator designation with a "4"(45 °), "9" (90°) or "7" (Offset)
(Eg , A-304, A309, A-307 etc.)
** Please Wear Protective eyeware while intsalling and removing retaining ring & hose clamps.**

1 - 15 of 15 | Results Per Page | View | Unit of Measure
1 

Daemar P/N

Ring Size

Blade Width A

Blade Width B

Tip Length C

Offset D

Rotor Clip P/N

A-708 N/A DE-0,8 N/A 0.265 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-708
A-712 N/A DE-1,2 N/A 0.265 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-712
A-715 N/A DE-1,5 N/A 0.265 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-715
A-719 N/A DE-1,9 N/A 0.265 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-719
A-723 N/A DE-2,3 N/A 0.5 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-723
A-310 N/A DE-3,2 N/A 0.5 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-310
A-340 N/A DE-0004 N/A 0.5 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-340
A-605 N/A DE-0005 N/A 0.812 N/A 2.218 N/A 0.593 N/A 0.625 N/A A-605
A-606 N/A DE-0006 N/A 0.812 N/A 2.218 N/A 0.593 N/A 0.625 N/A A-606
A-607 N/A DE-0007 N/A 0.812 N/A 2.218 N/A 0.593 N/A 0.625 N/A A-607
A-608 N/A DE-0008 N/A 0.812 N/A 2.218 N/A 0.593 N/A 0.625 N/A A-608
A-609 N/A DE-0009 N/A 1.125 N/A 2.39 N/A 0.765 N/A 0.625 N/A A-609
A-610 N/A DE-0010 N/A 1.125 N/A 2.39 N/A 0.765 N/A 0.625 N/A A-610
A-612 N/A DE-0012 N/A 1.562 N/A 2.625 N/A 0.969 N/A 0.625 N/A A-612
A-615 N/A DE-0015 N/A 1.562 N/A 2.625 N/A 0.969 N/A 0.625 N/A A-615
1 - 15 of 15 | Results Per Page | View | Unit of Measure
1 

Daemar at a Glance

Managing the sourcing & delivery of millions of Essential Components to the manufacturing & MRO marketplace.

Four locations across North America:

Daemar Canada

Daemar USA

ISO-9001 Registered QMS

Copyright 2016, Daemar Inc. | Design by Persona Corp.