1.800.387.7115

1.877.432.3627

Applicators are designed to install standard radial retaining rings on a shaft. Used with Dispensers, applicators enable operators to install rings quickly and correctly (ring “snaps” when properly seated in groove.)
For use with Retaining Rings JE Rings 
*45 ° deg, 90 ° deg and Offset applicators for C,E,RE Retaining Rings- Replace the Last "0" of the Applicator designation with a "4"(45 °), "9" (90°) or "7" (Offset)
(Eg , A-304, A309, A-307 etc.)
** Please Wear Protective eyeware while intsalling and removing retaining ring & hose clamps.**

1 - 9 of 9 | Results Per Page | View | Unit of Measure
1 

Daemar P/N

Ring Size

Blade Width A

Blade Width B

Tip Length C

Offset D

Rotor Clip P/N

A-080 N/A JE-002 N/A 0.5 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-080
A-050 N/A JE-2.5 N/A 0.5 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-050
A-070 N/A JE-003 N/A 0.5 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-070
A-340 N/A JE-004 N/A 0.5 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-340
A-605 N/A JE-005 N/A 0.812 N/A 2.218 N/A 0.593 N/A 0.625 N/A A-605
A-606 N/A JE-006 N/A 0.812 N/A 2.218 N/A 0.593 N/A 0.625 N/A A-606
A-607 N/A JE-007 N/A 0.812 N/A 2.218 N/A 0.593 N/A 0.625 N/A A-607
A-608 N/A JE-008 N/A 0.812 N/A 2.218 N/A 0.593 N/A 0.625 N/A A-608
A-612 N/A JE-012 N/A 1.562 N/A 2.625 N/A 0.969 N/A 0.625 N/A A-612
1 - 9 of 9 | Results Per Page | View | Unit of Measure
1 

Daemar at a Glance

Managing the sourcing & delivery of millions of Essential Components to the manufacturing & MRO marketplace.

Four locations across North America:

Daemar Canada

Daemar USA

ISO-9001 Registered QMS

Copyright 2016, Daemar Inc. | Design by Persona Corp.