1.800.387.7115

1.877.432.3627

Applicators are designed to install standard radial retaining rings on a shaft. Used with Dispensers, applicators enable operators to install rings quickly and correctly (ring “snaps” when properly seated in groove.)
For use with Retaining Rings ME Rings 
*45 ° deg, 90 ° deg and Offset applicators for C,E,RE Retaining Rings- Replace the Last "0" of the Applicator designation with a "4"(45 °), "9" (90°) or "7" (Offset)
(Eg , A-304, A309, A-307 etc.)
** Please Wear Protective eyeware while intsalling and removing retaining ring & hose clamps.**

1 - 16 of 16 | Results Per Page | View | Unit of Measure
1 

Daemar P/N

Ring Size

Blade Width A

Blade Width B

Tip Length C

Offset D

Rotor Clip P/N

A-010 N/A ME-0001 N/A 0.265 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-010
A-040 N/A ME-0002 N/A 0.265 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-040
A-050 N/A ME-0003 N/A 0.5 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-050
A-100 N/A ME-0004 N/A 0.5 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-100
A-120 N/A ME-0005 N/A 0.5 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-120
A-140 N/A ME-0006 N/A 0.812 N/A 2.218 N/A 0.593 N/A 0.625 N/A A-140
A-150 N/A ME-0007 N/A 0.812 N/A 2.218 N/A 0.593 N/A 0.625 N/A A-150
A-290 N/A ME-0008 N/A 0.812 N/A 2.218 N/A 0.593 N/A 0.625 N/A A-290
A-608 N/A ME-0009 N/A 0.812 N/A 2.218 N/A 0.593 N/A 0.625 N/A A-608
A-170 N/A ME-0010 N/A 0.812 N/A 2.218 N/A 0.593 N/A 0.625 N/A A-170
A-180 N/A ME-0011 N/A 0.812 N/A 2.218 N/A 0.593 N/A 0.625 N/A A-180
A-609 N/A ME-0012 N/A 1.125 N/A 2.39 N/A 0.765 N/A 0.625 N/A A-609
A-200 N/A ME-0013 N/A 1.125 N/A 2.39 N/A 0.765 N/A 0.625 N/A A-200
A-612 N/A ME-0015 N/A 1.125 N/A 2.39 N/A 0.969 N/A 0.625 N/A A-612
A-210 N/A ME-0016 N/A 1.125 N/A 2.39 N/A 0.765 N/A 0.625 N/A A-210
A-240 N/A ME-0022 N/A 1.125 N/A 2.625 N/A 0.969 N/A 0.625 N/A A-240
1 - 16 of 16 | Results Per Page | View | Unit of Measure
1 

Daemar at a Glance

Managing the sourcing & delivery of millions of Essential Components to the manufacturing & MRO marketplace.

Four locations across North America:

Daemar Canada

Daemar USA

ISO-9001 Registered QMS

Copyright 2016, Daemar Inc. | Design by Persona Corp.