1.800.387.7115

1.877.432.3627

Applicators are designed to install standard radial retaining rings on a shaft. Used with Dispensers, applicators enable operators to install rings quickly and correctly (ring “snaps” when properly seated in groove.)
For use with Retaining Rings RE Rings 
*45 ° deg, 90 ° deg and Offset applicators for C,E,RE Retaining Rings- Replace the Last "0" of the Applicator designation with a "4"(45 °), "9" (90°) or "7" (Offset)
(Eg , A-304, A309, A-307 etc.)
** Please Wear Protective eyeware while intsalling and removing retaining ring & hose clamps.**

1 - 11 of 11 | Results Per Page | View | Unit of Measure
1 

Daemar P/N

Ring Size

Blade Width A

Blade Width B

Tip Length C

Offset D

Rotor Clip P/N

A-080 N/A RE-0009 N/A 0.5 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-010
A-520 N/A RE-0012 N/A 0.5 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-020
A-120 N/A RE-0015 N/A 0.5 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-030
A-130 N/A RE-0018 N/A 0.5 N/A 1.438 N/A 0.375 N/A 0.375 N/A A-040
A-140 N/A RE-0021 N/A 0.812 N/A 2.218 N/A 0.593 N/A 0.625 N/A A-050
A-160 N/A RE-0025 N/A 0.812 N/A 2.218 N/A 0.593 N/A 0.625 N/A A-510
A-500 N/A RE-0031 N/A 0.812 N/A 2.218 N/A 0.593 N/A 0.625 N/A A-060
A-170 N/A RE-0037 N/A 0.812 N/A 2.218 N/A 0.593 N/A 0.625 N/A A-050
A-270 N/A RE-0043 N/A 1.125 N/A 2.39 N/A 0.765 N/A 0.625 N/A A-080
A-200 N/A RE-0050 N/A 1.125 N/A 2.39 N/A 0.765 N/A 0.625 N/A A-090
A-280 N/A RE-0056 N/A 1.125 N/A 2.39 N/A 0.765 N/A 0.625 N/A A-070
1 - 11 of 11 | Results Per Page | View | Unit of Measure
1 

Daemar at a Glance

Managing the sourcing & delivery of millions of Essential Components to the manufacturing & MRO marketplace.

Four locations across North America:

Daemar Canada

Daemar USA

ISO-9001 Registered QMS

Copyright 2016, Daemar Inc. | Design by Persona Corp.