Ultrabake™ Dual Purpose Plugs -
Ultrabake™ Dual Purpose Plugs are designed to plug round or square, plain or threaded holes; they will mask off the hole and allow finishing up to it.
How the product is used
The hole can be a blind hole or a through hole.
The hole can be round or square. One side of this plug is round and the other side is square.
The plug is tapered and is applied by pushing the smaller diameter into the hole. The plug is removed by pulling on the end that remains out of the hole.
Powder coating, E-coating, Plating, Anodizing, Spray painting Temperature Range
Maximum temperature 600 ºF (315 ºC) Design Features
|UDPP-SH-0500||A N/A .625 in15.88 mm||B N/A 0.375 in9.53 mm||C N/A .500 in12.7 mm||D N/A 0.625 in15.88 mm||E N/A .375 in9.53 mm||F N/A .500 in12.70 mm||Colour N/A Purple||Packaging -Bag N/A 250|
|UDPP-SH-0625||A N/A .75 in19.05 mm||B N/A 0.500 in12.700 mm||C N/A .625 in15.88 mm||D N/A 0.750 in19.05 mm||E N/A .500 in12.70 mm||F N/A 0.625 in15.88 mm||Colour N/A Rusty Red||Packaging -Bag N/A 250|
|UDPP-SH-0750||A N/A .75 in19.05 mm||B N/A 0.625 in15.88 mm||C N/A .75 in19.05 mm||D N/A 0.750 in19.05 mm||E N/A .625 in15.88 mm||F N/A 0.750 in19.05 mm||Colour N/A Green||Packaging -Bag N/A 100|
|UDPP-SH-1000||A N/A 1.000 in25.40 mm||B N/A .875 in22.23 mm||C N/A 1.000 in25.4 mm||D N/A 1.000 in25.400 mm||E N/A .875 in22.23 mm||F N/A 1.00 in25.40 mm||Colour N/A Rusty Red||Packaging -Bag N/A 100|