1.800.387.7115

1.877.432.3627

Ultrabake™ Washer Pull Plugs -

Purpose
Ultrabake™ Washer Pull Plugs are designed to mask plain and threaded holes; they will mask off the hole and leave a circular grounding or earthing area around the hole.

How the product is used
The hole must be a through hole.
The plug is applied by being pulled into the hole. The narrow end of the plug is placed into the hole, and then the operator uses the narrower end to pull the larger end through the hole. As the plug is pulled the larger diameter stretches and becomes smaller, allowing the plug to fit through the hole. Once the grounding diameter is tight against the face of the area to be masked, the plug is released. The plug then forms a tight seal on the hole and the grounding area.
One end of the plug is similar in design to a pull plug, whilst the area above the grounding diameter can be used as a handle to remove the plug.

Recommended for
Powder coating, E-coating, Plating, Anodizing, Spray painting Temperature Range
Maximum temperature 600 ºF (315 ºC) Design Features

  • Dual purpose - In addition to masking a components grounding area, the plug can be pulled into holes that are counter sunk to mask off the faces of the countersink
  • Two stage - The large and small diameters help with insertion
  • Handle - The handle area above the grounding diameter helps with removal
  • Sizes - This series offers sizes specifically designed for metric threaded holes
  • Visible - The handle area above the grounding diameter makes the plug easier to see on the component
  • Labor saving - The washer design eliminates the need for two-stage masking
  • Tight fit - The grounding diameter can be pulled down onto the area to be masked
  • Reusable - The plugs are reusable depending on the application
  • Color coded - The Plugs are color coded to ease identification and sorting
  • Identification - The Shercon name is on the plug
Storage conditions
Items should be stored in dry conditions at an ambient temperature of between 55 ºF (13 ºC) and 85 ºF (30 ºC). It is important to rotate stock and use the product in the order that it is received.
1 - 14 of 14 | Results Per Page | View | Unit of Measure
1 

Daemar P/N

Thread Size

A

B

C

D

E

F

Colour

Packaging -Bag

UWPP-SH-M3 N/A M3 N/A .394 in10.01 mm N/A .105 in2.67 mm N/A 0.107 in2.72 mm N/A 0.390 in9.91 mm N/A .060 in1.52 mm N/A .090 in2.29 mm N/A DARK BLUE N/A 250
UWPP-SH-M4 N/A M4 N/A .394 in10.01 mm N/A 0.140 in3.56 mm N/A 0.107 in2.72 mm N/A 0.390 in9.91 mm N/A .080 in2.03 mm N/A .120 in3.05 mm N/A DARK GREEN N/A 250
UWPP-SH-M5 N/A M5 N/A .394 in10.01 mm N/A .176 in4.47 mm N/A 0.107 in2.72 mm N/A 0.390 in9.91 mm N/A .100 in2.54 mm N/A .150 in3.81 mm N/A CLEAR N/A 250
UWPP-SH-M6 N/A M6 N/A .591 in15.01 mm N/A 0.211 in5.36 mm N/A 0.165 in4.19 mm N/A 0.390 in9.91 mm N/A .120 in3.05 mm N/A .180 in4.57 mm N/A White N/A 250
UWPP-SH-M8 N/A M8 N/A .591 in15.01 mm N/A .283 in7.19 mm N/A 0.165 in4.19 mm N/A 0.390 in9.91 mm N/A .161 in4.09 mm N/A .240 in6.10 mm N/A GREY N/A 250
UWPP-SH-M10 N/A M10 N/A .787 in19.99 mm N/A 0.375 in9.53 mm N/A .210 in5.33 mm N/A 0.390 in9.91 mm N/A .214 in5.44 mm N/A .320 in8.13 mm N/A Yellow N/A 100
UWPP-SH-M12 N/A M12 N/A .787 in19.99 mm N/A .428 in10.87 mm N/A .210 in5.33 mm N/A 0.390 in9.91 mm N/A .244 in6.20 mm N/A .360 in9.14 mm N/A PINK N/A 100
UWPP-SH-500 N/A 10-24 N/A 0.500 in12.700 mm N/A 0.167 in4.24 mm N/A 0.107 in2.72 mm N/A 0.390 in9.91 mm N/A .095 in2.41 mm N/A .140 in3.56 mm N/A PINK N/A 250
UWPP-SH-562 N/A 12-24 N/A .562 in14.27 mm N/A 0.193 in4.90 mm N/A 0.107 in2.72 mm N/A 0.390 in9.91 mm N/A .110 in2.79 mm N/A .160 in4.06 mm N/A Yellow N/A 250
UWPP-SH-625 N/A 1/4-12 N/A .625 in15.88 mm N/A .225 in5.72 mm N/A 0.107 in2.72 mm N/A 0.390 in9.91 mm N/A .128 in3.25 mm N/A 0.190 in4.83 mm N/A Green N/A 250
UWPP-SH-688 N/A 5/16-18 N/A 0.688 in17.48 mm N/A .284 in7.21 mm N/A 0.165 in4.19 mm N/A 0.390 in9.91 mm N/A .162 in4.11 mm N/A .240 in6.10 mm N/A CLEAR N/A 250
UWPP-SH-812 N/A 3/8-16 N/A .812 in20.62 mm N/A .342 in8.69 mm N/A 0.165 in4.19 mm N/A 0.390 in9.91 mm N/A .195 in4.95 mm N/A .290 in7.37 mm N/A GREY N/A 100
UWPP-SH-922 N/A 7/16-14 N/A 0.922 in23.42 mm N/A .400 in10.16 mm N/A .210 in5.33 mm N/A 0.390 in9.91 mm N/A .228 in5.79 mm N/A .340 in8.64 mm N/A White N/A 100
UWPP-SH-1060 N/A 1/2-13 N/A 1.060 in26.92 mm N/A .459 in11.66 mm N/A .210 in5.33 mm N/A 0.390 in9.91 mm N/A .262 in6.65 mm N/A .390 in9.91 mm N/A DARK BLUE N/A 100
1 - 14 of 14 | Results Per Page | View | Unit of Measure
1 

Daemar at a Glance

Managing the sourcing & delivery of millions of Essential Components to the manufacturing & MRO marketplace.

Four locations across North America:

Daemar Canada

Daemar USA

ISO-9001 Registered QMS

Copyright 2016, Daemar Inc. | Design by Persona Corp.