1.800.387.7115

1.877.432.3627

The MRE retaining ring is a reinforced version of the ME ring. which will accommodate higher thrust loadings and RPM. MRE rings function in the same groove as regular E rings, so that you can change from one to the other without re-engineering the application.

Material Finish/Code: Stainless Steel 

PH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900º F.


Size Range: 4 mm - 15 mm
1 - 11 of 11 | Results Per Page | View |
1 

Daemar P/N

Shaft Diameter - Ds

Groove Diameter - Dg

Groove Width - W

Groove Depth - d

Ring Free Diameter - Df

Ring Thickness - T

MRE-005-H N/A 5.0 mm N/A 3.85 mm N/A 0.70 mm N/A 0.57 mm N/A 3.65 mm N/A 0.60 mm
MRE-006-H N/A 6.0 mm N/A 4.85 mm N/A 0.70 mm N/A 0.57 mm N/A 4.65 mm N/A 0.60 mm
MRE-007-H N/A 7.0 mm N/A 5.40 mm N/A 0.70 mm N/A 0.80 mm N/A 5.20 mm N/A 0.60 mm
MRE-008-H N/A 8.0 mm N/A 6.40 mm N/A 0.70 mm N/A 0.80 mm N/A 6.15 mm N/A 0.60 mm
MRE-009-H N/A 9.0 mm N/A 7.10 mm N/A 1.00 mm N/A 0.95 mm N/A 6.75 mm N/A 0.90 mm
MRE-010-H N/A 10.0 mm N/A 7.80 mm N/A 1.00 mm N/A 1.10 mm N/A 7.45 mm N/A 0.90 mm
MRE-011-H N/A 11.0 mm N/A 8.80 mm N/A 1.00 mm N/A 1.10 mm N/A 8.45 mm N/A 0.90 mm
MRE-012-H N/A 12.0 mm N/A 9.50 mm N/A 1.20 mm N/A 1.25 mm N/A 9.10 mm N/A 1.10 mm
MRE-013-H N/A 13.0 mm N/A 10.20 mm N/A 1.20 mm N/A 1.40 mm N/A 9.80 mm N/A 1.10 mm
MRE-014-H N/A 14.0 mm N/A 11.20 mm N/A 1.20 mm N/A 1.40 mm N/A 10.90 mm N/A 1.10 mm
MRE-015-H N/A 15.0 mm N/A 11.80 mm N/A 1.20 mm N/A 1.60 mm N/A 11.50 mm N/A 1.10 mm
1 - 11 of 11 | Results Per Page | View |
1 

Daemar at a Glance

Managing the sourcing & delivery of millions of Essential Components to the manufacturing & MRO marketplace.

Four locations across North America:

Daemar Canada

Daemar USA

ISO-9001 Registered QMS

Copyright 2016, Daemar Inc. | Design by Persona Corp.