1.800.387.7115

1.877.432.3627

Perhaps the most popular and widely used radial retaining ring is the "E" (so named because it is shaped like the letter "E".) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.

Material Finish/Code: Stainless Steel 

PH 15-7 Mo is an extra strength corrosion-resistant steel, capable of preventing atmospheric oxidation at temperatures up to 900º F.



Size Range: 8 mm - 30 mm

Sharp Corner Abutment.The radius "R" on the load side must not exceed 0.1 T.
1 - 18 of 18 | Results Per Page | View |
1 

Daemar P/N

Nom Size - Dg

Shaft Diameter - Ds

Groove Diameter - Dg

Groove Width - W

Ring Thickness - T

Ring Gap - A

Clearance Free O.D. - G Ref.

DE-0.8-H N/A 0.8 mm N/A 1.0 to 1.4 mm N/A 0.80 mm N/A 0.24 mm N/A 0.20 mm N/A 0.58 mm N/A 1.95 mm
DE-1.2-H N/A 1.2 mm N/A 1.4 to 2.0 mm N/A 1.20 mm N/A 0.34 mm N/A 0.30 mm N/A 1.01 mm N/A 2.90 mm
DE-1.5-H N/A 1.5 mm N/A 2.0 to 2.5 mm N/A 1.50 mm N/A 0.44 mm N/A 0.40 mm N/A 1.28 mm N/A 3.90 mm
DE-1.9-H N/A 1.9 mm N/A 2.5 to 3.0 mm N/A 1.90 mm N/A 0.54 mm N/A 0.50 mm N/A 1.61 mm N/A 4.40 mm
DE-2.3-H N/A 2.3 mm N/A 3.0 to 4.0 mm N/A 2.30 mm N/A 0.64 mm N/A 0.60 mm N/A 1.94 mm N/A 5.90 mm
DE-3.2-H N/A 3.2 mm N/A 4.0 to 5.0 mm N/A 3.20 mm N/A 0.64 mm N/A 0.60 mm N/A 2.70 mm N/A 6.90 mm
DE-004-H N/A 4.0 mm N/A 5.0 to 7.0 mm N/A 4.00 mm N/A 0.74 mm N/A 0.70 mm N/A 3.34 mm N/A 8.85 mm
DE-005-H N/A 5.0 mm N/A 6.0 to 8.0 mm N/A 5.00 mm N/A 0.74 mm N/A 0.70 mm N/A 4.11 mm N/A 10.85 mm
DE-006-H N/A 6.0 mm N/A 7.0 to 9.0 mm N/A 6.00 mm N/A 0.74 mm N/A 0.70 mm N/A 5.26 mm N/A 11.80 mm
DE-007-H N/A 7.0 mm N/A 8.0 to 11.0 mm N/A 7.00 mm N/A 0.94 mm N/A 0.90 mm N/A 5.84 mm N/A 13.80 mm
DE-008-H N/A 8.0 mm N/A 9.0 to 12.0 mm N/A 8.00 mm N/A 1.05 mm N/A 1.00 mm N/A 6.52 mm N/A 15.75 mm
DE-009-H N/A 9.0 mm N/A 10.0 to 14.0 mm N/A 9.00 mm N/A 1.15 mm N/A 1.10 mm N/A 7.63 mm N/A 18.20 mm
DE-010-H N/A 10.0 mm N/A 11.0 to 15.0 mm N/A 10.00 mm N/A 1.25 mm N/A 1.20 mm N/A 8.32 mm N/A 19.70 mm
DE-012-H N/A 12.0 mm N/A 13.0 to 18.0 mm N/A 12.00 mm N/A 1.35 mm N/A 1.30 mm N/A 10.45 mm N/A 22.70 mm
DE-015-H N/A 15.0 mm N/A 16.0 to 24.0 mm N/A 15.00 mm N/A 1.55 mm N/A 1.50 mm N/A 12.61 mm N/A 28.70 mm
DE-019-H N/A 19.0 mm N/A 20.0 to 31.0 mm N/A 19.00 mm N/A 1.80 mm N/A 1.75 mm N/A 15.92 mm N/A 36.50 mm
DE-024-H N/A 24.0 mm N/A 25.0 to 38.0 mm N/A 24.00 mm N/A 2.05 mm N/A 2.00 mm N/A 21.88 mm N/A 43.50 mm
DE-030-H N/A 30.0 mm N/A 32.0 to 42.0 mm N/A 30.00 mm N/A 2.55 mm N/A 2.50 mm N/A 25.80 mm N/A 51.30 mm
1 - 18 of 18 | Results Per Page | View |
1 

Daemar at a Glance

Managing the sourcing & delivery of millions of Essential Components to the manufacturing & MRO marketplace.

Four locations across North America:

Daemar Canada

Daemar USA

ISO-9001 Registered QMS

Copyright 2016, Daemar Inc. | Design by Persona Corp.