Daemar Inc. - DE - External E Ring
Daemar Inc.
buttons  
 
Search Catalog
      GO   
 All Categories    DE - External E Ring
All Categories > Engineered Fasteners & Retaining Rings > Rotor Clip® Retaining Rings > Metric Retaining Rings > Metric Radially Assembled Rings > JE - External E Ring > ME - External E Ring > DE - External E Ring > View Items 
    Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

DE - External E Ring

 width= 
Check up to five results to perform an action.
 width=


Perhaps the most popular and widely used radial retaining ring is the "E" (so named because it is shaped like the letter "E".) Three prongs make contact with the bottom of the groove and provide a shoulder for effective retention of assemblies.

Size Range: 8 mm - 30 mm

Sharp Corner Abutment.The radius "R" on the load side must not exceed 0.1 T.
DE - External E Ring

larger image 		DE - External E Ring

larger image


Request InformationCompare Items   Results Per Page : 
  Results 1 - 18 of 18 1 

Item #

Nom Size - Dg

Shaft Diameter - Ds

Groove Diameter - Dg

Groove Width - W

Ring Thickness - T

Ring Gap - A

DE-0.8 0.8 mm 1.0 to 1.4 mm 0.80 mm 0.24 mm 0.20 mm 0.58 mm
DE-1.2 1.2 mm 1.4 to 2.0 mm 1.20 mm 0.34 mm 0.30 mm 1.01 mm
DE-1.5 1.5 mm 2.0 to 2.5 mm 1.50 mm 0.44 mm 0.40 mm 1.28 mm
DE-1.9 1.9 mm 2.5 to 3.0 mm 1.90 mm 0.54 mm 0.50 mm 1.61 mm
DE-2.3 2.3 mm 3.0 to 4.0 mm 2.30 mm 0.64 mm 0.60 mm 1.94 mm
DE-3.2 3.2 mm 4.0 to 5.0 mm 3.20 mm 0.64 mm 0.60 mm 2.70 mm
DE-4 4.0 mm 5.0 to 7.0 mm 4.00 mm 0.74 mm 0.70 mm 3.34 mm
DE-5 5.0 mm 6.0 to 8.0 mm 5.00 mm 0.74 mm 0.70 mm 4.11 mm
DE-6 6.0 mm 7.0 to 9.0 mm 6.00 mm 0.74 mm 0.70 mm 5.26 mm
DE-7 7.0 mm 8.0 to 11.0 mm 7.00 mm 0.94 mm 0.90 mm 5.84 mm
DE-8 8.0 mm 9.0 to 12.0 mm 8.00 mm 1.05 mm 1.00 mm 6.52 mm
DE-9 9.0 mm 10.0 to 14.0 mm 9.00 mm 1.15 mm 1.10 mm 7.63 mm
DE-10 10.0 mm 11.0 to 15.0 mm 10.00 mm 1.25 mm 1.20 mm 8.32 mm
DE-12 12.0 mm 13.0 to 18.0 mm 12.00 mm 1.35 mm 1.30 mm 10.45 mm
DE-15 15.0 mm 16.0 to 24.0 mm 15.00 mm 1.55 mm 1.50 mm 12.61 mm
DE-19 19.0 mm 20.0 to 31.0 mm 19.00 mm 1.80 mm 1.75 mm 15.92 mm
DE-24 24.0 mm 25.0 to 38.0 mm 24.00 mm 2.05 mm 2.00 mm 21.88 mm
DE-30 30.0 mm 32.0 to 42.0 mm 30.00 mm 2.55 mm 2.50 mm 25.80 mm
  Results 1 - 18 of 18 1 
| SITE MAP | WHATS NEW | ABOUT US | PRODUCTS | SERVICE | CONTACT US | RESOURCES |


Copyright © 1996-2007. All rights reserved.
Daemar® Inc. / DMR™ / Fiber-Lube™ / Quick-Turn™ are trademarks of
Daemar® Inc. All material on the site, including, without limitation,
text, logo, software, photos, video, graphics, music, and sound, are
protected by copyright laws, both as individual works and as a
collection. No reproduction authorized in any form electronic or
otherwise without specific written permission.

This site includes links to other internet sites solely as a convenience
to users. Daemar, Inc. does not endorse any such linked sites or the
information, material, products and services offered.

whatsnewaboutusProductsservicescontactusresources