Daemar Inc. - O-Ring Size Metric
Daemar Inc.
buttons  
 
Search Catalog
      GO   
 All Categories    O-Ring Size Metric
All Categories > O-Rings > Molded O-Rings > O-Ring Size Metric > View Items 
    Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

O-Ring Size Metric

 
Check up to five results to perform an action.

lg_orings2

larger image 		O-Ring Stretch
As a general rule of thumb the groove I.D. should stretch the O-Ring I.D. by between 1 to 3% and by no more than 5%. Exceeding this limit may over stress the material.

Groove Design
Groove depth should be less than the cross sectional width of the O-Ring. The groove width should be wider than the cross sectional width of the O-Ring in order to accommodate O-Ring compression.

Search Items


Request InformationCompare Items   Results Per Page : 
  Results 1 - 25 of 860 1 2 3 4 5 »  

Item #

Nominal Size I.D.

Nominal Thickness W

1.50 x 1.00 1.50 mm 1.00 mm
1.78 x 1.02 1.78 mm 1.02 mm
1.80 x 1.00 1.80 mm 1.00 mm
1.80 x 1.50 1.80 mm 1.50 mm
1.85 x 1.50 1.85 mm 1.50 mm
2.00 x 1.00 2.00 mm 1.00 mm
2.00 x 1.50 2.00 mm 1.50 mm
2.20 x 1.60 2.20 mm 1.60 mm
2.40 x 1.90 2.40 mm 1.90 mm
2.50 x 1.00 2.50 mm 1.00 mm
2.50 x 1.50 2.50 mm 1.50 mm
2.50 x 2.00 2.50 mm 2.00 mm
2.54 x 0.97 2.54 mm 0.97 mm
2.60 x 1.90 2.60 mm 1.90 mm
2.60 x 2.00 2.60 mm 2.00 mm
2.70 x 1.00 2.70 mm 1.00 mm
2.75 x 1.60 2.75 mm 1.60 mm
2.80 x 1.50 2.80 mm 1.50 mm
3.00 x 1.00 3.00 mm 1.00 mm
3.00 x 1.50 3.00 mm 1.50 mm
3.00 x 2.00 3.00 mm 2.00 mm
3.10 x 1.60 3.10 mm 1.60 mm
3.17 x 1.78 3.17 mm 1.78 mm
3.25 x 1.27 3.25 mm 1.27 mm
3.30 x 1.00 3.30 mm 1.00 mm
  Results 1 - 25 of 860 1 2 3 4 5 »  
| SITE MAP | WHATS NEW | ABOUT US | PRODUCTS | SERVICE | CONTACT US | RESOURCES |


Copyright © 1996-2007. All rights reserved.
Daemar® Inc. / DMR™ / Fiber-Lube™ / Quick-Turn™ are trademarks of
Daemar® Inc. All material on the site, including, without limitation,
text, logo, software, photos, video, graphics, music, and sound, are
protected by copyright laws, both as individual works and as a
collection. No reproduction authorized in any form electronic or
otherwise without specific written permission.

This site includes links to other internet sites solely as a convenience
to users. Daemar, Inc. does not endorse any such linked sites or the
information, material, products and services offered.

whatsnewaboutusProductsservicescontactusresources