Daemar Inc. - O-Rings by AS 568 Dash Number
Daemar Inc.
buttons  
 
Search Catalog
      GO   
 All Categories    O-Rings by AS 568 Dash Number
All Categories > O-Rings > Molded O-Rings > O-Rings by AS 568 Dash Number > View Items 
    Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

O-Rings by AS 568 Dash Number

 
Check up to five results to perform an action.

lg_orings2

larger image 		Static Sealing
Most O-Rings are used in static service (the O-Ring and metal surfaces remain relatively fixed). They may be applied as face seals or radial seals. In face seal applications, the O-Ring should seat against the low pressure side of the groove .

Dynamic Sealing
The O-Ring moves relative to the mating surface. A moving seal may be further classified by the type of motion: reciprocating, oscillating, or rotating.
The greatest number of dynamic seals are used in reciprocating service in cylinders, valves, and linear actuators. Oscillating motion is encountered in swivels and valve stems.
When an O-Ring is used on a rotating shaft, it should be limited to light duty where the shaft speed is low and some fluid bypass is acceptable.

Search Items


Request InformationCompare Items   Results Per Page : 
  Results 1 - 25 of 349 1 2 3 4 5 »  

AS 568 Size

Nominal Size I.D.

Nominal Size O.D.

Nominal Thickness W

Actual Size I.D.

Actual Thickness W

001 1/32 in 3/32 in 1/32 in 0.029 in
0.74 mm 		0.040 in
1.02 mm
002 3/64 in 9/64 in 3/64 in 0.042 in
1.07 mm 		0.050 in
1.27 mm
003 1/16 in 3/16 in 1/16 in 0.056 in
1.42 mm 		0.060 in
1.53 mm
004 5/64 in 13/64 in 1/16 in 0.070 in
1.78 mm 		0.070 in
1.78 mm
005 3/32 in 7/32 in 1/16 in 0.101 in
2.57 mm 		0.070 in
1.78 mm
006 1/8 in 1/4 in 1/16 in 0.114 in
2.90 mm 		0.070 in
1.78 mm
007 5/32 in 9/32 in 1/16 in 0.145 in
3.69 mm 		0.070 in
1.78 mm
008 3/16 in 5/16 in 1/16 in 0.176 in
4.47 mm 		0.070 in
1.78 mm
009 7/32 in 11/32 in 1/16 in 0.208 in
5.29 mm 		0.070 in
1.78 mm
010 1/4 in 3/8 in 1/16 in 0.239 in
6.07 mm 		0.070 in
1.78 mm
011 5/16 in 7/16 in 1/16 in 0.301 in
7.65 mm 		0.070 in
1.78 mm
012 3/8 in 1/2 in 1/16 in 0.364 in
9.25 mm 		0.070 in
1.78 mm
013 7/16 in 9/16 in 1/16 in 0.426 in
10.82 mm 		0.070 in
1.78 mm
014 1/2 in 5/8 in 1/16 in 0.489 in
12.42 mm 		0.070 in
1.78 mm
015 9/16 in 11/16 in 1/16 in 0.551 in
14.00 mm 		0.070 in
1.78 mm
016 5/8 in 3/4 in 1/16 in 0.614 in
15.60 mm 		0.070 in
1.78 mm
017 11/16 in 13/16 in 1/16 in 0.676 in
17.17 mm 		0.070 in
1.78 mm
018 3/4 in 7/8 in 1/16 in 0.739 in
18.77 mm 		0.070 in
1.78 mm
019 13/16 in 15/16 in 1/16 in 0.801 in
20.35 mm 		0.070 in
1.78 mm
020 7/8 in 1 in 1/16 in 0.864 in
21.95 mm 		0.070 in
1.78 mm
021 15/16 in 1 1/16 in 1/16 in 0.926 in
23.52 mm 		0.070 in
1.78 mm
022 1 in 1 1/8 in 1/16 in 0.989 in
25.12 mm 		0.070 in
1.78 mm
023 1 1/16 in 1 3/16 in 1/16 in 1.051 in
26.70 mm 		0.070 in
1.78 mm
024 1 1/8 in 1 1/4 in 1/16 in 1.114 in
28.30 mm 		0.070 in
1.78 mm
025 1 3/16 in 1 5/16 in 1/16 in 1.176 in
29.87 mm 		0.070 in
1.78 mm
  Results 1 - 25 of 349 1 2 3 4 5 »  
| SITE MAP | WHATS NEW | ABOUT US | PRODUCTS | SERVICE | CONTACT US | RESOURCES |


Copyright © 1996-2007. All rights reserved.
Daemar® Inc. / DMR™ / Fiber-Lube™ / Quick-Turn™ are trademarks of
Daemar® Inc. All material on the site, including, without limitation,
text, logo, software, photos, video, graphics, music, and sound, are
protected by copyright laws, both as individual works and as a
collection. No reproduction authorized in any form electronic or
otherwise without specific written permission.

This site includes links to other internet sites solely as a convenience
to users. Daemar, Inc. does not endorse any such linked sites or the
information, material, products and services offered.

whatsnewaboutusProductsservicescontactusresources