1.800.387.7115

1.877.432.3627

Multi-Turn- Metric

Used for low force applications with large deflections: More turns equals less force. Utilizes nearly half the space as helical compression springs while producing the same force.

Multi-Turn Plain End and Multi-Turn Flat Shim tops available

*Not available with shim ends

ALL DIMENSIONS IN MILLIMETERS UNLESS OTHERWISE SPECIFIED.

PART NUMBERS SHOWN REFLECT MULTI-TURN WAVE SPRINGS WITH PLAIN ENDS.

THE LETTERS SHOWN AFTER THE PART NUMBERS REPRESENT THE NUMBER OF TURNS. WHEN ORDERING, PARTS SHOULD BE PRESENTED WITH THE PART NUMBER, FOLLOWED BY THE MATERIAL, AND THEN THE NUMBER OF TURNS (i.e. MWL-8ST A, MWM-10ST B, MWR-14ST C, ETC.)

FOR FLAT SHIM TOP WAVE SPRINGS, ADD AN 'F' TO THE END OF THE PART NUMBER (i.e. MWL-8ST AF, MWM-10ST BF, MWR-14ST CF, ETC.)

MATERIAL CODES: ST = CARBON STEEL. SQ = 17-7 PH/C STAINLESS STEEL. SPECIAL ALLOYS AVAILABLE UPON REQUEST.

1 - 25 of 447 | Results Per Page | View |
 1 2 3 4 5 »  

Daemar P/N

Housing Diameter - Dh

Load - N

Number of Waves

Number of Turns

Section - S

Spring Rate Ref. N/mm

MWL-6 A* N/A 6 mm N/A 6 mm N/A 2.5 mm N/A 3 mm N/A 0.51 mm N/A 6.56 mm
MWL-6 B* N/A 6 mm N/A 6 mm N/A 2.5 mm N/A 4 mm N/A 0.51 mm N/A 4.92 mm
MWL-6 C* N/A 6 mm N/A 6 mm N/A 2.5 mm N/A 5 mm N/A 0.51 mm N/A 3.94 mm
MWL-6 D* N/A 6 mm N/A 6 mm N/A 2.5 mm N/A 6 mm N/A 0.51 mm N/A 3.28 mm
MWL-6 E* N/A 6 mm N/A 6 mm N/A 2.5 mm N/A 7 mm N/A 0.51 mm N/A 2.81 mm
MWL-6 F* N/A 6 mm N/A 6 mm N/A 2.5 mm N/A 8 mm N/A 0.51 mm N/A 2.46 mm
MWL-6 G* N/A 6 mm N/A 6 mm N/A 2.5 mm N/A 9 mm N/A 0.51 mm N/A 2.19 mm
MWL-6 H* N/A 6 mm N/A 6 mm N/A 2.5 mm N/A 11 mm N/A 0.51 mm N/A 1.79 mm
MWL-6 I* N/A 6 mm N/A 6 mm N/A 2.5 mm N/A 13 mm N/A 0.51 mm N/A 1.51 mm
MWM-6 A* N/A 6 mm N/A 12 mm N/A 2.5 mm N/A 3 mm N/A 0.61 mm N/A 15.24 mm
MWM-6 B* N/A 6 mm N/A 12 mm N/A 2.5 mm N/A 4 mm N/A 0.61 mm N/A 11.25 mm
MWM-6 C* N/A 6 mm N/A 12 mm N/A 2.5 mm N/A 5 mm N/A 0.61 mm N/A 9.09 mm
MWM-6 D* N/A 6 mm N/A 12 mm N/A 2.5 mm N/A 6 mm N/A 0.61 mm N/A 7.62 mm
MWM-6 E* N/A 6 mm N/A 12 mm N/A 2.5 mm N/A 7 mm N/A 0.61 mm N/A 6.47 mm
MWM-6 F* N/A 6 mm N/A 12 mm N/A 2.5 mm N/A 8 mm N/A 0.61 mm N/A 5.69 mm
MWM-6 G* N/A 6 mm N/A 12 mm N/A 2.5 mm N/A 9 mm N/A 0.61 mm N/A 5.03 mm
MWM-6 H* N/A 6 mm N/A 12 mm N/A 2.5 mm N/A 11 mm N/A 0.61 mm N/A 4.14 mm
MWM-6 I* N/A 6 mm N/A 12 mm N/A 2.5 mm N/A 13 mm N/A 0.61 mm N/A 3.50 mm
MWL-8 A N/A 8.00 mm N/A 15 mm N/A 2.5 mm N/A 3 mm N/A 0.81 mm N/A 13.42 mm
MWL-8 B N/A 8.00 mm N/A 15 mm N/A 2.5 mm N/A 4 mm N/A 0.81 mm N/A 10.94 mm
MWL-8 C N/A 8.00 mm N/A 15 mm N/A 2.5 mm N/A 5 mm N/A 0.81 mm N/A 7.67 mm
MWL-8 D N/A 8.00 mm N/A 15 mm N/A 2.5 mm N/A 6 mm N/A 0.81 mm N/A 7.20 mm
MWL-8 E N/A 8.00 mm N/A 15 mm N/A 2.5 mm N/A 7 mm N/A 0.81 mm N/A 5.85 mm
MWL-8 F N/A 8.00 mm N/A 15 mm N/A 2.5 mm N/A 8 mm N/A 0.81 mm N/A 5.09 mm
MWL-8 G N/A 8.00 mm N/A 15 mm N/A 2.5 mm N/A 9 mm N/A 0.81 mm N/A 4.69 mm
1 - 25 of 447 | Results Per Page | View |
 1 2 3 4 5 »  

Daemar at a Glance

Managing the sourcing & delivery of millions of Essential Components to the manufacturing & MRO marketplace.

Four locations across North America:

Daemar Canada

Daemar USA

ISO-9001 Registered QMS

Copyright 2016, Daemar Inc. | Design by Persona Corp.