1.800.387.7115

1.877.432.3627

A thicker version of the DHO featuring a larger radial width than this ring. Once installed in the groove of a housing/bore. the portion of the ring protruding from the groove (also called a "shoulder") holds an assembly in place. 

Material Finish: Zinc Bright  

Material Codes: Carbon spring steel (SAE 1060-1090/UNS G10600-G10900)

This standard finish is recommended over unfinished plain steel since it offers an extended shelf-life protection against rusting. 


Size Range:
20 mm - 100 mm

The radius "R" on the load side must not exceed 0.1 T.
26 - 33 of 33 | Results Per Page | View |
1 2 

Daemar P/N

Housing Diameter - Dh

Groove Diameter - Dg

Groove Width - W min

Groove Depth - d

Ring Thickness - T

Ring Free Diameter - Df

DHR-070-ZF N/A 70.00 mm N/A 73.00 mm N/A 3.15 mm N/A 1.50 mm N/A 3.00 mm N/A 74.50 mm
DHR-072-ZF N/A 72.00 mm N/A 75.00 mm N/A 3.15 mm N/A 1.50 mm N/A 3.00 mm N/A 76.50 mm
DHR-075-ZF N/A 75.00 mm N/A 78.00 mm N/A 3.15 mm N/A 1.50 mm N/A 3.00 mm N/A 79.50 mm
DHR-080-ZF N/A 80.00 mm N/A 83.50 mm N/A 4.15 mm N/A 1.75 mm N/A 4.00 mm N/A 85.50 mm
DHR-085-ZF N/A 85.00 mm N/A 88.50 mm N/A 4.15 mm N/A 1.75 mm N/A 4.00 mm N/A 90.50 mm
DHR-090-ZF N/A 90.00 mm N/A 93.50 mm N/A 4.15 mm N/A 1.75 mm N/A 4.00 mm N/A 95.50 mm
DHR-095-ZF N/A 95.00 mm N/A 98.50 mm N/A 4.15 mm N/A 1.75 mm N/A 4.00 mm N/A 100.50 mm
DHR-100-ZF N/A 100.00 mm N/A 103.50 mm N/A 4.15 mm N/A 1.75 mm N/A 4.00 mm N/A 105.50 mm
26 - 33 of 33 | Results Per Page | View |
1 2 

Daemar at a Glance

Managing the sourcing & delivery of millions of Essential Components to the manufacturing & MRO marketplace.

Four locations across North America:

Daemar Canada

Daemar USA

ISO-9001 Registered QMS

Copyright 2016, Daemar Inc. | Design by Persona Corp.