Daemar Inc. - Stainless Steel Shim Rolls
Daemar Inc.
buttons  
 
Search Catalog
      GO   
 All Categories    Stainless Steel Shim Rolls
All Categories > Shim Stock > Shim Stock Rolls > Stainless Steel Shim Rolls > View Items 
    Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Stainless Steel Shim Rolls

 
Check up to five results to perform an action.

DMR Steel Shim Roll

larger image 		DMR Stainless Steel Shim can be used in any application where corrosion is a concern. DMR Stainless Steel is 300 Series, full hard tempered (half-hard and annealed Stainless is also available on request). Full-hard Stainless Steel is slightly magnetic due to cold rolling. Stainless Steel Shim Stock has a Rockwell hardness of C40-45 and meets the following specifications: MIL-S-5059, QQS766 and QQS763. Special slit widths are also available on request. Typical weight: .010” X 6” X 50” =. 875lbs.

Search Items


Request InformationCompare Items   Results Per Page : 
  Results 1 - 25 of 31 1 2 

Item #

Thickness

Thickness - Tolerance

Rolls

Width

Width - Tolerance

10905-0005 0.0005 in ± 10% 6 x 50 in 6 in ± .005 in
10001-001 0.0010 in ± 10% 6 x 50 in 6 in ± .005 in
10805-015 0.0015 in ± 10% 6 x 50 in 6 in ± .005 in
10002-002 0.0020 in ± 10% 6 x 50 in 6 in ± .005 in
10003-003 0.0030 in ± 10% 6 x 50 in 6 in ± .005 in
10004-004 0.0040 in ± 10% 6 x 50 in 6 in ± .005 in
10005-005 0.0050 in ± 10% 6 x 50 in 6 in ± .005 in
10006-006 0.0060 in ± 10% 6 x 50 in 6 in ± .005 in
10007-007 0.0070 in ± 10% 6 x 50 in 6 in ± .005 in
10008-008 0.0080 in ± 10% 6 x 50 in 6 in ± .005 in
10009-009 0.0090 in ± 10% 6 x 50 in 6 in ± .005 in
10010-010 0.0100 in ± 10% 6 x 50 in 6 in ± .005 in
10012-012 0.0120 in ± .001 in 6 x 50 in 6 in ± .005 in
10015-015 0.0150 in ± .001 in 6 x 50 in 6 in ± .005 in
10020-020 0.0200 in ± .0015 in 6 x 50 in 6 in ± .005 in
10025-025 0.0250 in ± .0015 in 6 x 50 in 6 in ± .005 in
10031-031 0.0310 in ± .002 in 6 x 50 in 6 in ± .005 in
12001-001 0.0010 in ± 10% 12 x 50 in 12 in ± .010 in
12002-002 0.0020 in ± 10% 12 x 50 in 12 in ± .010 in
12003-003 0.0030 in ± 10% 12 x 50 in 12 in ± .010 in
12004-004 0.0040 in ± 10% 12 x 50 in 12 in ± .010 in
12005-005 0.0050 in ± 10% 12 x 50 in 12 in ± .010 in
12006-006 0.0060 in ± 10% 12 x 50 in 12 in ± .010 in
12007-007 0.0070 in ± 10% 12 x 50 in 12 in ± .010 in
12008-008 0.0080 in ± 10% 12 x 50 in 12 in ± .010 in
  Results 1 - 25 of 31 1 2 
| SITE MAP | WHATS NEW | ABOUT US | PRODUCTS | SERVICE | CONTACT US | RESOURCES |


Copyright © 1996-2007. All rights reserved.
Daemar® Inc. / DMR™ / Fiber-Lube™ / Quick-Turn™ are trademarks of
Daemar® Inc. All material on the site, including, without limitation,
text, logo, software, photos, video, graphics, music, and sound, are
protected by copyright laws, both as individual works and as a
collection. No reproduction authorized in any form electronic or
otherwise without specific written permission.

This site includes links to other internet sites solely as a convenience
to users. Daemar, Inc. does not endorse any such linked sites or the
information, material, products and services offered.

whatsnewaboutusProductsservicescontactusresources