1.800.387.7115

1.877.432.3627

DMR Steel Shim is low carbon mild steel cold rolled to a #1 hard temper. It is stiff and springy, and can be used where hardness is required. The material can be punched or sheared with minimum burring and distortion. Steel Shim Stock meets the following specifications: AISI 1010 & QQS 698. Available in .001" to .031" and in standard packages 6" X 100" or 12" X 120". Special slit widths are also available on request. Typical weight .010" X 6" X 100" = 1.7 lbs.
1 - 25 of 32 | Results Per Page | View | Unit of Measure
1 2 

Daemar P/N

Thickness

Thickness - Tolerance

Rolls

Width

Width - Tolerance

30001-001 N/A 0.0010 in N/A ± 10% N/A 6 x 100 in N/A 6 in N/A ± .005 in
30805-015 N/A 0.0015 in N/A ± 10% N/A 6 x 100 in N/A 6 in N/A ± .005 in
30002-002 N/A 0.0020 in N/A ± 10% N/A 6 x 100 in N/A 6 in N/A ± .005 in
30003-003 N/A 0.0030 in N/A ± 10% N/A 6 x 100 in N/A 6 in N/A ± .005 in
30004-004 N/A 0.0040 in N/A ± .005 in N/A 6 x 100 in N/A 6 in N/A ± .005 in
30005-005 N/A 0.0050 in N/A ± .005 in N/A 6 x 100 in N/A 6 in N/A ± .005 in
30006-006 N/A 0.0060 in N/A ± .005 in N/A 6 x 100 in N/A 6 in N/A ± .005 in
30007-007 N/A 0.0070 in N/A ± .00075 in N/A 6 x 100 in N/A 6 in N/A ± .005 in
30008-008 N/A 0.0080 in N/A ± .00075 in N/A 6 x 100 in N/A 6 in N/A ± .005 in
30009-009 N/A 0.0090 in N/A ± .00075 in N/A 6 x 100 in N/A 6 in N/A ± .005 in
30010-010 N/A 0.0100 in N/A ± .00075 in N/A 6 x 100 in N/A 6 in N/A ± .005 in
30012-012 N/A 0.0120 in N/A ± .00075 in N/A 6 x 100 in N/A 6 in N/A ± .005 in
30015-015 N/A 0.0150 in N/A ± .00075 in N/A 6 x 100 in N/A 6 in N/A ± .005 in
30020-020 N/A 0.0200 in N/A ± .001 in N/A 6 x 100 in N/A 6 in N/A ± .005 in
30025-025 N/A 0.0250 in N/A ± .001 in N/A 6 x 100 in N/A 6 in N/A ± .005 in
30031-031 N/A .031 in N/A ± .0015 in N/A 6 x 100 in N/A 6 in N/A ± .005 in
32001-001 N/A 0.0010 in N/A ± 10% N/A 12 x 120 in N/A 12 in N/A ± .010 in
32002-002 N/A 0.0020 in N/A ± 10% N/A 12 x 120 in N/A 12 in N/A ± .010 in
32003-003 N/A 0.0030 in N/A ± 10% N/A 12 x 120 in N/A 12 in N/A ± .010 in
32004-004 N/A 0.0040 in N/A ± .005 in N/A 12 x 120 in N/A 12 in N/A ± .010 in
32005-005 N/A 0.0050 in N/A ± .005 in N/A 12 x 120 in N/A 12 in N/A ± .010 in
32006-006 N/A 0.0060 in N/A ± .005 in N/A 12 x 120 in N/A 12 in N/A ± .010 in
32007-007 N/A 0.0070 in N/A ± .00075 in N/A 12 x 120 in N/A 12 in N/A ± .010 in
32008-008 N/A 0.0080 in N/A ± .00075 in N/A 12 x 120 in N/A 12 in N/A ± .010 in
32009-009 N/A 0.0090 in N/A ± .00075 in N/A 12 x 120 in N/A 12 in N/A ± .010 in
1 - 25 of 32 | Results Per Page | View | Unit of Measure
1 2 

Daemar at a Glance

Managing the sourcing & delivery of millions of Essential Components to the manufacturing & MRO marketplace.

Four locations across North America:

Daemar Canada

Daemar USA

ISO-9001 Registered QMS

Copyright 2016, Daemar Inc. | Design by Persona Corp.