Daemar Inc. - TW-TH - Self-Lubricating Thrust Washers - Inch Sizes
Daemar Inc.
buttons  
 
Search Catalog
      GO   
 All Categories    TW-TH - Self-Lubricating Thrust Washers - Inch Sizes
All Categories > Bushings & Bearings > Dryslide™ > TH - Self Lubricating Bushings (Lead Free) > TW-TH - Self-Lubricating Thrust Washers - Inch Sizes > View Items 
    Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

TW-TH - Self-Lubricating Thrust Washers - Inch Sizes

 width= 
Check up to five results to perform an action.
 width=


Thrust Washers
Width = 0.0585 & 0.0895 in
Inside Diameter = 0.500 to 2.250 in
Outside Diameter = 0.875 to 3.250 in

The Dryslide trademark identifies a whole range of self-lubricated dry sliding bearings. A composite structure, TW-TH thrust washers consists of a carbon steel backing, an intermediate layer of sintered bronze, PTFE based sliding lining. From a technical point of view, the product is already widely known and new applications are constantly being identified to take advantage of the high load capacity, the self-lubricated feature and the excellent ratio between cost and performance of the whole range.
DMR_TW_Washer_image

larger image 		TW_dim

larger image


Request InformationCompare Items   Results Per Page : 
  Results 1 - 17 of 17 1 

Item #

Diameter - D4

Diameter - D5

Width - S

Dowel Hole - J

Diameter - A

TW-06-TH 0.5000 in 0.8750 in 0.0585 in 0.6920 in 0.0670 in
TW-07-TH 0.5620 in 1.0000 in 0.0585 in 0.7860 in 0.0670 in
TW-08-TH 0.6250 in 1.1250 in 0.0585 in 0.8800 in 0.0990 in
TW-09-TH 0.6870 in 1.1870 in 0.0585 in 0.9420 in 0.0990 in
TW-10-TH 0.7500 in 1.1250 in 0.0585 in 1.0050 in 0.0990 in
TW-11-TH 0.8120 in 1.3750 in 0.0585 in 1.0990 in 0.0990 in
TW-12-TH 0.8750 in 1.5000 in 0.0585 in 1.1920 in 0.1300 in
TW-14-TH 1.0000 in 1.7500 in 0.0585 in 1.3800 in 0.1300 in
TW-16-TH 1.1250 in 2.0000 in 0.0585 in 1.5670 in 0.1610 in
TW-18-TH 1.2500 in 2.1250 in 0.0585 in 1.6920 in 0.1610 in
TW-20-TH 1.3750 in 2.2500 in 0.0585 in 1.8170 in 0.1610 in
TW-22-TH 1.5000 in 2.5000 in 0.0585 in 2.0050 in 0.1920 in
TW-24-TH 1.6250 in 2.6250 in 0.0585 in 2.1300 in 0.1920 in
TW-26-TH 1.7500 in 2.7500 in 0.0585 in 2.2550 in 0.1920 in
TW-28-TH 2.0000 in 3.0000 in 0.0895 in 2.5050 in 0.1920 in
TW-30-TH 2.1250 in 3.1250 in 0.0895 in 2.6300 in 0.1920 in
TW-32-TH 2.2500 in 3.2500 in 0.0895 in 2.7550 in 0.1920 in
  Results 1 - 17 of 17 1 
| SITE MAP | WHATS NEW | ABOUT US | PRODUCTS | SERVICE | CONTACT US | RESOURCES |


Copyright © 1996-2007. All rights reserved.
Daemar® Inc. / DMR™ / Fiber-Lube™ / Quick-Turn™ are trademarks of
Daemar® Inc. All material on the site, including, without limitation,
text, logo, software, photos, video, graphics, music, and sound, are
protected by copyright laws, both as individual works and as a
collection. No reproduction authorized in any form electronic or
otherwise without specific written permission.

This site includes links to other internet sites solely as a convenience
to users. Daemar, Inc. does not endorse any such linked sites or the
information, material, products and services offered.

whatsnewaboutusProductsservicescontactusresources