Daemar Inc. - THX - Pre-Lubricating Bushings - Inch Sizes
Daemar Inc.
buttons  
 
Search Catalog
      GO   
 All Categories    THX - Pre-Lubricating Bushings - Inch Sizes
All Categories > Bushings & Bearings > Dryslide™ > THX - Pre-Lubricating Bushings > THX - Pre-Lubricating Bushings - Inch Sizes > View Items 
    Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

THX - Pre-Lubricating Bushings - Inch Sizes

 width= 
Check up to five results to perform an action.
 width=


Length = 0.375 to 3.000 in
Shaft Diameter = 0.499 to 3.000 in

The THX trademark denotes a range of sliding cylindrical bushings produced from a material with a composite structure. The backing consists of carbon steel onto which a porous layer of bronze is sintered and then impregnated with a co-acetal plastic. The polymeric surface has indentations in which the lubricating grease lies and protects the mating surface. The main products in the THX range are the cylindrical bushings (DIN 1494), as well as special parts made to customer specifications.

Search Items
THX_bushings

larger image 		THX_dim

larger image


Request InformationCompare Items   Results Per Page : 
  Results 1 - 25 of 39 1 2 

Item #

Diameter - D1

Diameter - D6

Length - L

Shaft Diameter - d

Housing Bore - Dg

Installed ID - D1E

06THX06 0.5000 in 0.15625 in 0.3750 in 0.4990 in
0.5000 in 		0.6345 in
0.6352 in 		0.5007 in
0.5038 in
06THX08 0.5000 in 0.15625 in 0.5000 in 0.4990 in
0.5000 in 		0.6345 in
0.6352 in 		0.5007 in
0.5038 in
10THX10 0.6250 in 0.15625 in 0.5000 in 0.6240 in
0.6250 in 		0.7596 in
0.7604 in 		0.6258 in
0.6290 in
10THX12 0.6250 in 0.15625 in 0.7500 in 0.6240 in
0.6250 in 		0.7596 in
0.7604 in 		0.6258 in
0.6290 in
12THX12 0.7500 in 0.15625 in 0.7500 in 0.7488 in
0.7500 in 		0.8846 in
0.8854 in 		0.7508 in
0.7540 in
12THX16 0.7500 in 0.15625 in 1.0000 in 0.7488 in
0.7500 in 		0.8846 in
0.8854 in 		0.7508 in
0.7540 in
14THX12 0.8750 in 0.15625 in 0.7500 in 0.8738 in
0.8750 in 		1.0097 in
1.0105 in 		0.8759 in
0.8791 in
14THX16 0.8750 in 0.15625 in 1.0000 in 0.8738 in
0.8750 in 		1.0097 in
1.0105 in 		0.8759 in
0.8791 in
16THX12 1.0000 in 0.3125 in 0.7500 in 0.9988 in
1.0000 in 		1.1348 in
1.1356 in 		1.0010 in
1.0042 in
16THX16 1.0000 in 0.3125 in 1.0000 in 0.9988 in
1.0000 in 		1.1348 in
1.1356 in 		1.0010 in
1.0042 in
18THX12 1.1250 in 0.3125 in 0.7500 in 1.1238 in
1.1250 in 		1.2598 in
1.2606 in 		1.1260 in
1.1292 in
18THX16 1.1250 in 0.3125 in 1.0000 in 1.1238 in
1.1250 in 		1.2598 in
1.2606 in 		1.1260 in
1.1292 in
20THX12 1.2500 in 0.3125 in 0.7500 in 1.2484 in
1.2500 in 		1.4160 in
1.4170 in 		1.2512 in
1.2550 in
20THX16 1.2500 in 0.3125 in 1.0000 in 1.2484 in
1.2500 in 		1.4160 in
1.4170 in 		1.2512 in
1.2550 in
22THX16 1.3750 in 0.3125 in 1.0000 in 1.3743 in
1.3750 in 		1.5410 in
1.5420 in 		1.3762 in
1.3800 in
22THX24 1.3750 in 0.3125 in 1.5000 in 1.3743 in
1.3750 in 		1.5410 in
1.5420 in 		1.3762 in
1.3800 in
24THX16 1.5000 in 0.3125 in 1.0000 in 1.4984 in
1.5000 in 		1.6660 in
1.6670 in 		1.5012 in
1.5050 in
24THX24 1.5000 in 0.3125 in 1.5000 in 1.4984 in
1.5000 in 		1.6660 in
1.6670 in 		1.5012 in
1.5050 in
24THX32 1.5000 in 0.3125 in 2.0000 in 1.4984 in
1.5000 in 		1.6660 in
1.6670 in 		1.5012 in
1.5050 in
26THX16 1.6250 in 0.3125 in 1.0000 in 1.6234 in
1.6250 in 		1.7910 in
1.7920 in 		1.6262 in
1.6300 in
26THX24 1.6250 in 0.3125 in 1.5000 in 1.6234 in
1.6250 in 		1.7910 in
1.7920 in 		1.6262 in
1.6300 in
26THX32 1.6250 in 0.3125 in 2.0000 in 1.6234 in
1.6250 in 		1.7910 in
1.7920 in 		1.6262 in
1.6300 in
28THX16 1.7500 in 0.3125 in 1.0000 in 1.7484 in
1.7500 in 		1.9371 in
1.9381 in 		1.7515 in
1.7577 in
28THX24 1.7500 in 0.3125 in 1.5000 in 1.7484 in
1.7500 in 		1.9371 in
1.9381 in 		1.7515 in
1.7577 in
28THX32 1.7500 in 0.3125 in 2.0000 in 1.7484 in
1.7500 in 		1.9371 in
1.9381 in 		1.7515 in
1.7577 in
  Results 1 - 25 of 39 1 2 
| SITE MAP | WHATS NEW | ABOUT US | PRODUCTS | SERVICE | CONTACT US | RESOURCES |


Copyright © 1996-2007. All rights reserved.
Daemar® Inc. / DMR™ / Fiber-Lube™ / Quick-Turn™ are trademarks of
Daemar® Inc. All material on the site, including, without limitation,
text, logo, software, photos, video, graphics, music, and sound, are
protected by copyright laws, both as individual works and as a
collection. No reproduction authorized in any form electronic or
otherwise without specific written permission.

This site includes links to other internet sites solely as a convenience
to users. Daemar, Inc. does not endorse any such linked sites or the
information, material, products and services offered.

whatsnewaboutusProductsservicescontactusresources