Daemar Inc. - TW - Pre-Lubricating Thrust Washers - Inch Sizes
Daemar Inc.
buttons  
 
Search Catalog
      GO   
 All Categories    TW - Pre-Lubricating Thrust Washers - Inch Sizes
All Categories > Bushings & Bearings > Dryslide™ > THX - Pre-Lubricating Bushings > TW - Pre-Lubricating Thrust Washers - Inch Sizes > View Items 
    Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

TW - Pre-Lubricating Thrust Washers - Inch Sizes

 width= 
Check up to five results to perform an action.
 width=


THX Thrust Washers
Width = 0.0625 & 0.0895 in
Inside Diameter = 0.625 to 2.250 in
Outside Diameter = 1.125 to 3.250 in

The TW trademark denotes a range of thrust washers produced from a material with a composite structure. The backing consists of carbon steel onto which a porous layer of bronze is sintered and then impregnated with a co-acetal plastic. The polymeric surface has indentations in which the lubricating grease lies and protects the mating surface.
TW-THX Thrust Washer LG

larger image 		TW_THX_dim

larger image


Request InformationCompare Items   Results Per Page : 
  Results 1 - 13 of 13 1 

Item #

Diameter - D4

Diameter - D5

Width - S

Dowel Hole - J

Diameter - A

TW-08-THX 0.6250 in 1.1250 in 0.0625 in
0.0660 in 		0.8700 in 0.0990 in
0.1090 in
TW-10-THX 0.7500 in 1.1250 in 0.0625 in
0.0660 in 		0.9950 in
1.0050 in 		0.0990 in
0.1090 in
TW-12-THX 0.8750 in 1.5000 in 0.0625 in
0.0660 in 		1.1820 in
1.1920 in 		0.1300 in
0.1400 in
TW-14-THX 1.0000 in 1.7500 in 0.0625 in
0.0660 in 		1.3700 in
1.3800 in 		0.1300 in
0.1400 in
TW-16-THX 1.1250 in 2.0000 in 0.0625 in
0.0660 in 		1.5570 in
1.5670 in 		0.1610 in
0.1710 in
TW-18-THX 1.2500 in 2.1250 in 0.0625 in
0.0660 in 		1.6820 in
1.6920 in 		0.1610 in
0.1710 in
TW-20-THX 1.3750 in 2.2500 in 0.0625 in
0.0660 in 		1.8070 in
1.8170 in 		0.1610 in
0.1710 in
TW-22-THX 1.5000 in 2.5000 in 0.0625 in
0.0660 in 		1.9950 in
2.0050 in 		0.1920 in
0.2020 in
TW-24-THX 1.6250 in 2.6250 in 0.0625 in
0.0660 in 		2.1200 in
2.1300 in 		0.1920 in
0.2020 in
TW-26-THX 1.7500 in 2.7500 in 0.0625 in
0.0660 in 		2.2450 in
2.2550 in 		0.1920 in
0.2020 in
TW-28-THX 2.0000 in 3.0000 in 0.0895 in
0.0930 in 		2.4950 in
2.5050 in 		0.1920 in
0.2020 in
TW-30-THX 2.1250 in 3.1250 in 0.0895 in
0.0930 in 		2.6200 in
2.6300 in 		0.1920 in
0.2020 in
TW-32-THX 2.2500 in 3.2500 in 0.0895 in
0.0930 in 		2.7450 in
2.7550 in 		0.1920 in
0.2020 in
  Results 1 - 13 of 13 1 
| SITE MAP | WHATS NEW | ABOUT US | PRODUCTS | SERVICE | CONTACT US | RESOURCES |


Copyright © 1996-2007. All rights reserved.
Daemar® Inc. / DMR™ / Fiber-Lube™ / Quick-Turn™ are trademarks of
Daemar® Inc. All material on the site, including, without limitation,
text, logo, software, photos, video, graphics, music, and sound, are
protected by copyright laws, both as individual works and as a
collection. No reproduction authorized in any form electronic or
otherwise without specific written permission.

This site includes links to other internet sites solely as a convenience
to users. Daemar, Inc. does not endorse any such linked sites or the
information, material, products and services offered.

whatsnewaboutusProductsservicescontactusresources