1.800.387.7115

1.877.432.3627

Caplugs Edge Liner offers a convenient method for covering the sharp edges of large or irregularly shaped holes in sheet metal. It is pressed into place around the perimeter of the hole. Series EGL-22 is designed specifically to provide spacers when stacking sheet metal or board to protect the face of the sheet against scratches, to allow for air circulation between sheets, and to protect workers' hands against sharp edges. Material: High-Density Polyethylene, Low-Density Polyethylene, Vinyl Color: Black (Natural)
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1 

Daemar P/N

A

B

Minimum Bend Radius

Packaging

Metal Thickness

EGL-11-2 N/A 0.15 in3.81 mm N/A .170 in4.32 mm N/A 0.75 in19.05 mm N/A 500 Feet152 Meters N/A .05 – .081 in1.27 – 2.06 mm
EGL-11-3 N/A 0.16 in4.06 mm N/A 0.22 in5.59 mm N/A 1.00 in25.40 mm N/A 500 Feet152 Meters N/A .07 – .121 in1.78 – 3.07 mm
EGL-12-1/4 N/A 0.20 in5.08 mm N/A .280 in7.11 mm N/A 2.00 in50.80 mm N/A 150 Feet46 Meters N/A .13 – .283 in3.30 – 7.19 mm
EGL-12-1/2 N/A 0.30 in7.62 mm N/A 0.500 in12.700 mm N/A 2.50 in63.50 mm N/A 125 Feet38 Meters N/A .25 – .506 in6.35 – 12.85 mm
EGL-12-3/4 N/A 0.35 in8.89 mm N/A .75 in19.05 mm N/A 3.00 in76.20 mm N/A 100 Feet31 Meters N/A .38 – .759 in9.65 – 19.28 mm
EGL-22-4 N/A 0.65 in16.51 mm N/A 0.140 in3.56 mm N/A N/A 500 Feet152 Meters N/A .01 – .120 in.25 – 3.05 mm
EGL-22-6 N/A 1.000 in25.40 mm N/A 0.22 in5.59 mm N/A N/A 250 Feet76 Meters N/A .11 – .182 in2.79 – 4.62 mm
EGL-22-12 N/A 1.92 in48.77 mm N/A 0.23 in5.84 mm N/A N/A 400 (100 pcs cut in 48" lengths) Feet123 (100 pcs cut in 1.23m lengths) Meters N/A .03 – .190 in.76 – 4.83 mm
1 - 8 of 8 | Results Per Page | View | Unit of Measure
1 

Daemar at a Glance

Managing the sourcing & delivery of millions of Essential Components to the manufacturing & MRO marketplace.

Four locations across North America:

Daemar Canada

Daemar USA

ISO-9001 Registered QMS

Copyright 2016, Daemar Inc. | Design by Persona Corp.