1.800.387.7115

1.877.432.3627

Rubber ring for shaft requiring a dynamic seal (primary or back-up) in the axial direction. The body of V seals rotate with the shaft and holds itself in position by its elastic fit on the shaft. Sealing is produced by the contact between the lip and the counterface. Additionally, the V Series seal has good sealing action when the shaft is eccentric and/or there is some misalignment. Combined with radial shaft seals, these axial face seal designs provide excellent excluding characteristics against all types of liquids, greases, oils, dirt, sand and other foreign materials.

VL – narrow cross-section where space is limited
1 - 23 of 23 | Results Per Page | View | Unit of Measure
1 

Daemar P/N

Shaft Diameter - d1

I.D. - d

Height - c

Dimension - A

Free Width - B

VL-110 N/A 105 mm115 mm4.14 in4.53 in N/A 99.0 mm3.90 in N/A 6.5 mm0.26 in N/A 6 mm0.24 in N/A 10.5 mm0.41 in
VL-120 N/A 115 mm125 mm4.53 in4.92 in N/A 108.0 mm4.25 in N/A 6.5 mm0.26 in N/A 6 mm0.24 in N/A 10.5 mm0.41 in
VL-130 N/A 125 mm135 mm4.92 in5.32 in N/A 117.0 mm4.61 in N/A 6.5 mm0.26 in N/A 6 mm0.24 in N/A 10.5 mm0.41 in
VL-140 N/A 135 mm145 mm5.32 in5.71 in N/A 126.0 mm4.96 in N/A 6.5 mm0.26 in N/A 6 mm0.24 in N/A 10.5 mm0.41 in
VL-150 N/A 145 mm155 mm5.71 in6.10 in N/A 135.0 mm5.31 in N/A 6.5 mm0.26 in N/A 6 mm0.24 in N/A 10.5 mm0.41 in
VL-160 N/A 155 mm165 mm6.10 in6.50 in N/A 144.0 mm5.67 in N/A 6.5 mm0.26 in N/A 6 mm0.24 in N/A 10.5 mm0.41 in
VL-170 N/A 165 mm175 mm6.50 in6.89 in N/A 153.0 mm6.02 in N/A 6.5 mm0.26 in N/A 6 mm0.24 in N/A 10.5 mm0.41 in
VL-180 N/A 175 mm185 mm6.89 in7.29 in N/A 162.0 mm6.38 in N/A 6.5 mm0.26 in N/A 6 mm0.24 in N/A 10.5 mm0.41 in
VL-190 N/A 185 mm195 mm7.29 in7.68 in N/A 171.0 mm6.73 in N/A 6.5 mm0.26 in N/A 6 mm0.24 in N/A 10.5 mm0.41 in
VL-200 N/A 195 mm210 mm7.68 in8.27 in N/A 182.0 mm7.17 in N/A 6.5 mm0.26 in N/A 6 mm0.24 in N/A 10.5 mm0.41 in
VL-220 N/A 210 mm233 mm8.27 in9.17 in N/A 198.0 mm7.80 in N/A 6.5 mm0.26 in N/A 6 mm0.24 in N/A 10.5 mm0.41 in
VL-250 N/A 233 mm260 mm9.17 in10.24 in N/A 225.0 mm8.86 in N/A 6.5 mm0.26 in N/A 6 mm0.24 in N/A 10.5 mm0.41 in
VL-275 N/A 260 mm285 mm10.24 in11.22 in N/A 247.0 mm9.72 in N/A 6.5 mm0.26 in N/A 6 mm0.24 in N/A 10.5 mm0.41 in
VL-300 N/A 285 mm310 mm11.22 in12.20 in N/A 270.0 mm10.63 in N/A 6.5 mm0.26 in N/A 6 mm0.24 in N/A 10.5 mm0.41 in
VL-325 N/A 310 mm335 mm12.20 in13.19 in N/A 292.0 mm11.50 in N/A 6.5 mm0.26 in N/A 6 mm0.24 in N/A 10.5 mm0.41 in
VL-350 N/A 335 mm365 mm13.19 in14.37 in N/A 315.0 mm12.40 in N/A 6.5 mm0.26 in N/A 6 mm0.24 in N/A 10.5 mm0.41 in
VL-375 N/A 365 mm385 mm14.37 in15.15 in N/A 337.0 mm13.27 in N/A 6.5 mm0.26 in N/A 6 mm0.24 in N/A 10.5 mm0.41 in
VL-400 N/A 385 mm425 mm15.15 in16.73 in N/A 360.0 mm14.17 in N/A 6.5 mm0.26 in N/A 6 mm0.24 in N/A 10.5 mm0.41 in
VL-450 N/A 425 mm475 mm16.73 in18.70 in N/A 405.0 mm15.94 in N/A 6.5 mm0.26 in N/A 6 mm0.24 in N/A 10.5 mm0.41 in
VL-500 N/A 475 mm510 mm18.70 in20.09 in N/A 450.0 mm17.72 in N/A 6.5 mm0.26 in N/A 6 mm0.24 in N/A 10.5 mm0.41 in
VL-525 N/A 510 mm540 mm20.09 in21.27 in N/A 472.0 mm18.59 in N/A 6.5 mm0.26 in N/A 6 mm0.24 in N/A 10.5 mm0.41 in
VL-550 N/A 540 mm575 mm21.27 in22.65 in N/A 495.0 mm19.50 in N/A 6.5 mm0.26 in N/A 6 mm0.24 in N/A 10.5 mm0.41 in
VL-600 N/A 575 mm625 mm22.65 in24.62 in N/A 540.0 mm21.27 in N/A 6.5 mm0.26 in N/A 6 mm0.24 in N/A 10.5 mm0.41 in
1 - 23 of 23 | Results Per Page | View | Unit of Measure
1 

Daemar at a Glance

Managing the sourcing & delivery of millions of Essential Components to the manufacturing & MRO marketplace.

Four locations across North America:

Daemar Canada

Daemar USA

ISO-9001 Registered QMS

Copyright 2016, Daemar Inc. | Design by Persona Corp.