Contact | After Hours Service | Catalog I Log In

1.800.387.7115

1.877.432.3627

  • V-Rings_VS
  • vs_rings_dim
Rubber ring for shaft requiring a dynamic seal (primary or back-up) in the axial direction. The body of V seals rotate with the shaft and holds itself in position by its elastic fit on the shaft. Sealing is produced by the contact between the lip and the counterface. Additionally, the V Series seal has good sealing action when the shaft is eccentric and/or there is some misalignment. Combined with radial shaft seals, these axial face seal designs provide excellent excluding characteristics against all types of liquids, greases, oils, dirt, sand and other foreign materials.

VS – wide body (angled back) for higher speed applications
1 - 25 of 39 | Results Per Page | View | Unit of Measure
1 2 
Request Information Compare Items Search by Specification

Daemar P/N

Shaft Diameter - d1

I.D. - d

Height - c

Dimension - A

Free Width - B

VS-5 N/A 4.6 mm5.3 mm0.18 in0.21 in N/A 4.0 mm0.16 in N/A 2.0 mm0.08 in N/A 3.9 mm0.15 in N/A 5.2 mm0.21 in
VS-6 N/A 5.3 mm6.6 mm0.21 in0.26 in N/A 5.0 mm0.20 in N/A 2.0 mm0.08 in N/A 3.9 mm0.15 in N/A 5.2 mm0.21 in
VS-7 N/A 6.6 mm7.9 mm0.26 in0.31 in N/A 6.0 mm0.24 in N/A 2.0 mm0.08 in N/A 3.9 mm0.15 in N/A 5.2 mm0.21 in
VS-8 N/A 7.9 mm9.4 mm0.31 in0.37 in N/A 7.0 mm0.28 in N/A 2.0 mm0.08 in N/A 3.9 mm0.15 in N/A 5.2 mm0.21 in
VS-10 N/A 9.4 mm11.4 mm0.37 in0.45 in N/A 9.0 mm0.35 in N/A 3.0 mm0.12 in N/A 5.6 mm0.22 in N/A 7.7 mm0.30 in
VS-12 N/A 11.4 mm13.5 mm0.45 in0.53 in N/A 10.5 mm0.41 in N/A 3.0 mm0.12 in N/A 5.6 mm0.22 in N/A 7.7 mm0.30 in
VS-14 N/A 13.5 mm15.5 mm0.53 in0.61 in N/A 12.5 mm0.49 in N/A 3.0 mm0.12 in N/A 5.6 mm0.22 in N/A 7.7 mm0.30 in
VS-16 N/A 15.5 mm17.5 mm0.61 in0.69 in N/A 14.0 mm0.55 in N/A 3.0 mm0.12 in N/A 5.6 mm0.22 in N/A 7.7 mm0.30 in
VS-18 N/A 17.5 mm19 mm0.69 in0.77 in N/A 16.0 mm0.63 in N/A 3.0 mm0.12 in N/A 5.6 mm0.22 in N/A 7.7 mm0.30 in
VS-20 N/A 19 mm21 mm0.77 in0.83 in N/A 18.0 mm0.71 in N/A 4.0 mm0.16 in N/A 7.9 mm0.31 in N/A 10.5 mm0.41 in
VS-22 N/A 21 mm24 mm0.83 in0.95 in N/A 20.0 mm0.79 in N/A 4.0 mm0.16 in N/A 7.9 mm0.31 in N/A 10.5 mm0.41 in
VS-25 N/A 24 mm27 mm0.95 in1.07 in N/A 22.0 mm0.87 in N/A 4.0 mm0.16 in N/A 7.9 mm0.31 in N/A 10.5 mm0.41 in
VS-28 N/A 27 mm29 mm1.07 in1.14 in N/A 25.0 mm0.98 in N/A 4.0 mm0.16 in N/A 7.9 mm0.31 in N/A 10.5 mm0.41 in
VS-30 N/A 29 mm31 mm1.14 in1.22 in N/A 27.0 mm1.06 in N/A 4.0 mm0.16 in N/A 7.9 mm0.31 in N/A 10.5 mm0.41 in
VS-32 N/A 31 mm33 mm1.22 in1.30 in N/A 29.0 mm1.14 in N/A 4.0 mm0.16 in N/A 7.9 mm0.31 in N/A 10.5 mm0.41 in
VS-35 N/A 33 mm36 mm1.30 in1.42 in N/A 31.0 mm1.22 in N/A 4.0 mm0.16 in N/A 7.9 mm0.31 in N/A 10.5 mm0.41 in
VS-38 N/A 36 mm38 mm1.42 in1.50 in N/A 34.0 mm1.34 in N/A 4.0 mm0.16 in N/A 7.9 mm0.31 in N/A 10.5 mm0.41 in
VS-40 N/A 38 mm43 mm1.50 in1.70 in N/A 36.0 mm1.42 in N/A 5.0 mm0.20 in N/A 9.5 mm0.37 in N/A 13 mm0.51 in
VS-45 N/A 43 mm48 mm1.70 in1.89 in N/A 40.0 mm1.57 in N/A 5.0 mm0.20 in N/A 9.5 mm0.37 in N/A 13 mm0.51 in
VS-50 N/A 48 mm53 mm1.89 in2.09 in N/A 45.0 mm1.77 in N/A 5.0 mm0.20 in N/A 9.5 mm0.37 in N/A 13 mm0.51 in
VS-55 N/A 53 mm58 mm2.09 in2.29 in N/A 49.0 mm1.93 in N/A 5.0 mm0.20 in N/A 9.5 mm0.37 in N/A 13 mm0.51 in
VS-60 N/A 58 mm63 mm2.29 in2.48 in N/A 54.0 mm2.13 in N/A 5.0 mm0.20 in N/A 9.5 mm0.37 in N/A 13 mm0.51 in
VS-65 N/A 63 mm68 mm2.48 in2.68 in N/A 58.0 mm2.28 in N/A 5.0 mm0.20 in N/A 9.5 mm0.37 in N/A 13 mm0.51 in
VS-70 N/A 68 mm73 mm2.68 in2.88 in N/A 63.0 mm2.48 in N/A 6.0 mm0.24 in N/A 11.3 mm0.44 in N/A 15.5 mm0.61 in
VS-80 N/A 78 mm83 mm3.07 in3.27 in N/A 72.0 mm2.83 in N/A 6.0 mm0.24 in N/A 11.3 mm0.44 in N/A 15.5 mm0.61 in
1 - 25 of 39 | Results Per Page | View | Unit of Measure
1 2 

Daemar at a Glance

Managing the sourcing & delivery of millions of Essential Components to the manufacturing & MRO marketplace.

Four locations across North America:

Daemar Canada

Daemar USA

ISO-9001 Registered QMS

Copyright 2016, Daemar Inc. | Design by Persona Corp.